MINIX NEO U9-H Media Hub Review – Part 2: Android 6.0 Firmware & Kodi 17

MINIX NEO U9-H is the successor of MINIX NEO U1 media hub with an upgrade from four to eight cores with Amlogic S912 processor, as well as added support for VP9 and HDR. The company sent me a sample, and I’ve already checked out NEO U9-H hardware in the fist part of the review, so I’ll report by testing results in Android 6.0 and Kodi 17 in the second part. Since the user interface & many of the features have not changed, I’ll refer to MINIX NEO U1 review from time to time.

Click to Enlarge

First Boot, OTA Firmware, Settings and First Impressions

I connected the MINIX A3 air mouse RF to one of the USB port, a USB 3.0 hard drive to another, and a USB hub to the last one with Tronsmart Mars G01 gamepad, a USB keyboard to take screenshots for the review, and a USB webcam. There’s also micro USB port, which you could use with the provided USB OTG adapter, but I have not used it. Last I also added USB powered speakers to the USB hub, and connected them to the 3.5mm audio jack. I also connected HDMI and optical audio cable to Onky TX-NR636 AV receiver, and an Ethernet cable to a Gigabit Ethernet swtich. Finally, I added the provided 5V/3A power supply, and pressed the power button on to start it all up. A typical boot takes around 30 seconds, and the first time, you’ll be asked to select between MINIX METRO or Launcher3 “Homes”.

I prefer MINIX METRO (below) as it’s more suited to larger screens, especially when you sit several meters from the TV. It’s the same launcher which I already described in MINIX NEO U1, except possibly for the weather indicator in the time/date window, and the mass storage devices ‘ Label is shown on the top right corner. I’d wish the WiFi, Ethernet, Bluetooth,and VPN icons on the top left were clickable, but they are not.

Click for Original Size

Launcher3 is basically the launcher you’d get with stock Android plus MINIX background image. You’ll also notice the larger mouse pointer which makes it convenient to use several meters away.

Click for Original Size

The box comes with some pre-installed apps like ES File Explorer, Kodi, YouTube, Google Play, AirDroid, MINIX Power Menu & System update apps, YouTube, Skype,  and so on.

MINIX has supported OTA firmware updates in all of their devices, so I tried with System Update app, but I could not test it there was no update to MHC16G20170216 firmware at the time.If you want to get an idea of how long you may expect to get firmware update, you can look at the forum for older products such as MINIX NEO X8-H. Eleven firmware updates have been released with the first “stock” firmware released on November, 2014 and the last (FW011) firmware released in January 2017, so it has been supported for over 2 years so far.

The Settings app is the same as with other Amlogic devices, and similar to MINIX NEO U1, so I’ll focuses on different and/or specific features.

Click to Enlarge

Once you enter the Display menu, you’ll find some typical features as well as  “Force RGB output” which may solve color / pink screen issues with some older TV, and HDR specific to Amlogic S905X/S912 processor.

If you enter the Audio settings, you’ll get options to select PCM, HDMI or SPDIF audio (pass-through), as usual, but there’s  also the Device Manager menu to select audio input and output devices.

In my setup I had three input device to choose from: on-board Mic input (3.5mm mic jack), USB-Audio – SAGE AiR Mouse (MINIX A3), and USB-Audio – Venus USB 2.0 camera, which will be important for voice commands, and video conferencing.

The output devices selection will be less useful for most people, as you can only select Auto or HDMI, as 3.5mm audio jack and S/PDIF are all outputted at the same time, and, only USB devices such as a USB sound card will show up.

You also have the same HDMI CEC, Playback settings and power key definition (standby or power off) as in MINIX NEO U1. There are three options for HDMI self-adaptation (automatic frame rate switching):

  • OFF – no processing
  • Level 1 – 23.976fps videos are processed under 1080p60Hz mode;
  • Level 2 – Switching TV’s output according to source video fps

If you go to Advanced Settings you’ll reach Android Marshmallow settings, and the main difference compared to competing Amlogic TV box, but already present on MINIX NEO U1 are “MCU settings” where you can enable autostart (no need to press power button), RTC alarm, and upgrade the MCU firmware.If we go into the Storage & USB section, we’ll find out a 10.89GB partition is available to the user, with about 1 GB used.

The system could also mount both NTFS and exFAT partitions, but not EXT-4.

If we go into About MediaBox, we’ll see the model number is indeed NEO-U9-H, and that it runs Android 6.01 on top of Linux 3.14.29 with the Android security patch dated on August 1st, 2016. The firmware is not rooted, but if that’s something you need I’m pretty sure a method will show on the forums in due time, although I’d prefer a switch in Android option to root and unroot the box as needed.

I shortly testing MINIX IR remote control and it worked at least for up to 10 meters. However, I really recommend getting MINIX A3, or if you don’t need voice input, MINIX A2 Lite air mouse, as it makes a big difference when using various Android apps. If you already own a box with MINIX A2 Lite air mouse, don’t worry that it will interface with MINIX A3 and control two devices at the same time, as my A2 Lite would not work with my A3 USB dongle. Voice input works fine as tested with Voice Search app. Press the microphone key on the remote to enable it, and you can now use “OK Google”, as you’d do on your smartphone. Just make sure Audio device input is set to the remote control. If you want to turn off the microphone, simply press the microphone key on the remote control. MINIX NEO A2 worked well up to 10 to 12 meters, and I could even see the mouse cursor at that distance.

I could install all apps I needed through Google Play, and the free version of Riptide GP2 via Amazon Underground. However, when I tried the free version of Riptide GP: Renegade it to “update your Amazon App to Amazon Underground to start experiencing actually free”. I had already isntall it, but clicked on Update Now anyway, and after update I had the exact same error message.

Click to Enlarge

That’s probably an issue with Amazon itself than with the box.

Power handling appears to be implemented exactly the same way as MINIX NEO U1, so you can go into standby, reboot, or power off the device with the remote control, or the power button. You can also power the device back on using either the IR remote control or MINIX A3 air mouse.

Power consumption is also similar to the previous model, as measured with or without hard drive using a power meter:

  • Power off – 0.1 Watt
  • Standby – 0.4 to 1.1 Watts (most of the time on 0.4)
  • Idle – 3.0 Watts
  • Power off + USB HDD – 0.1 Watt
  • Standby + USB HDD – 1.2 Watts with the HDD LED off. Be patient it may take about one minute to reach this power level with a hard drive connected.
  • Idle + USB HDD – 5.0~5.4 Watts

As expected, MINIX NEO U9-H dissipate power well thanks to its large heatsink. I measured 36°C and 37°C respectively on the top and bottom of the case after Antutu 6.0, and the temperature went up to 44°C and 49°C after playing a 2-hour 1080p H.264 video in Kodi, and 47°C and 54°C after playing and Beach Buggy Racing & Riptide GP2 for around 30 minutes. I quickly went to CPU-Z after exiting the game, and found the CPU temperature was 71°C.

So my first experience with MINIX NEO U9-H was even better than the very good one I had with MINIX NEO U1, since some of the bugs found the first firmware for the previous model, e.g. device stuck in standby mode, video output falling back from 4K @ 60 Hz to 1080p60 from time to time…, could not be reproduced with the new model.

Video & Audio Playback with Kodi 17.1-RC1, DRM Info

MINIX recommends the use of their XBMC MINIX Edition fork of Kodi for MINIX NEO U1, but with their new model, the company told me Kodi 17 worked well in U9-H, so I just use the pre-installed version: Kodi 17.1-RC1.

Click to Enlarge

I’m tested various video container formats, and video/audio codec playing files from a SAMBA share via (Gigabit Ethernet), unless otherwise noted.

Linaro media samples and some Elecard H.265 samples could also play fine except for VP8 1080p sample:

  • H.264 codec / MP4 container (Big Buck Bunny) – 480p/720p/1080p – OK
  • MPEG2 codec / MPG container –  480p/720p/1080p – OK
  • MPEG4 codec, AVI container 480p/720p/1080p – OK
  • VC1 codec (WMV) – 1080p – 480p/720p/1080p – OK
  • Real Media (RMVB), 720p / 5Mbps – OK
  • WebM / VP8 480p/720p – OK; 1080p: Not perfectly smooth (Note: software decode)
  • H.265 codec / MPEG TS container  – OK

I also enabled automatic frame rate switching in Kodi and Android settings (HDMI Self-adaption level 3), and it worked very well, which I think is a first amond the 8 or 9 Amlogic S912 I’ve tested so far.

Next up are some videos with various bit rates:

  • ED_HD.avi – Not smooth at all
  • big_buck_bunny_1080p_surround.avi (1080p H.264 – 12 Mbps) – First time: image freezes after a few seconds; second try: OK
  • h264_1080p_hp_4.1_40mbps_birds.mkv (40 Mbps) – OK
  • hddvd_demo_17.5Mbps_1080p_VC1.mkv (17.5Mbps) – Not perfectly smooth
  • Jellyfish-120-Mbps.mkv (120 Mbps video without audio) – OK

So the Jellyfish video plays better than in MINIX NEO U1 (Amlogic S905), but some other problems have showed up with other videos.

I’ve then checked out audio capabilties of the TV box with PCM (stereo) output, as well as HDMI and S/PDIF pass-through in Kodi. I also tested PCM (downmix) with MX Player to make sure those DTS and Dolby licenses are indeed valid for any apps. I could configure Kodi to pass-through AC3, E-AC3, DTS, TrueHD, and DTS-HD.

Click to Enlarge

MINIX NEO U1 did not support DTS-HD when it launched in December 2015 (firmware updates have fixed that), but MINIX NEO U9-H passed most tests just fine.

Video PCM 2.0 Output
(Kodi)
PCM 2.0 Output
(MX Player / Video Player app)
HDMI Pass-through
(Kodi)
S/PDIF Pass-through
(Kodi)
AC3 / Dolby Digital 5.1 OK OK OK (Dolby D 5.1) OK (Dolby D 5.1)
E-AC-3 / Dolby Digital+ 5.1 OK OK OK (Dolby D 5.1) OK (Dolby D 5.1)
Dolby Digital+ 7.1 OK OK OK (Dolby D+ 7.1) OK (Dolby D+ 7.1)
TrueHD 5.1 OK No audio OK (TrueHD 5.1) Audio Formats Not Supported over S/PDIF, and will show as PCM 2.0 or Dolby D 5.1 depending on whether AC3 transcoding is enabled in Kodi
TrueHD 7.1 OK No audio OK (TrueHD 7.1)
Dolby Atmos 7.1 OK Switch to AC3 audio track (beep), as TrueHD is not supported TrueHD 7.1*
DTS HD Master OK OK OK (DTS-HD Master) OK (DTS 5.1)
DTS HD High Resolution OK OK OK (DTS-HD HR) OK (DTS 5.1)
DTS:X OK OK DTS-HD Master* OK (DTS 5.1)

* My AV receiver (Onkyo TX-NR636) does not support Atmos nor DTS:X, so the fallback to respectively TrueHD and DTS HD Master is normal. So overall HDMI and optical S/PDIF pass-through is working well with my test samples, downmixing from Dolby Digital and DTS to stereo audio works, and the only problem is the lack of downmixing of Dolby TrueHD / Atmos audio in video apps that respect Dolby & DTS licenses.

4K video can now be played pretty well in Kodi, almost as well as with MX Player:

  • HD.Club-4K-Chimei-inn-60mbps.mp4 – OK
  • sintel-2010-4k.mkv – OK
  • Beauty_3840x2160_120fps_420_8bit_HEVC_MP4.mp4 (H.265) –  OK
  • Bosphorus_3840x2160_120fps_420_8bit_HEVC_MP4.mp4 (H.265) – OK
  • Jockey_3840x2160_120fps_420_8bit_HEVC_TS.ts (H.265) – OK
  • MHD_2013_2160p_ShowReel_R_9000f_24fps_RMN_QP23_10b.mkv (10-bit HEVC, 24 fps) – Not smooth at all, and the problem gets worse when automatic frame rate switching is enabled.
  • phfx_4KHD_VP9TestFootage.webm (VP9) – OK
  • BT.2020.20140602.ts (Rec.2020 compliant video) – OK, but it played for about 2 seconds, then buffered for a few more seconds before resuming playback normally
  • big_buck_bunny_4k_H264_30fps.mp4 – OK
  • big_buck_bunny_4k_H264_60fps.mp4 – The video plays in slow motion (4K H.264 @ 60 fps is not supported by S912 VPU)
  • Fifa_WorldCup2014_Uruguay-Colombia_4K-x265.mp4 (4K, H.265, 60 fps) – OK
  • Samsung_UHD_Dubai_10-bit_HEVC_51.4Mbps.ts (10-bit HEVC / MPEG-4 AAC) – OK
  • Astra-11479_V_22000-Canal+ UHD Demo 42.6 Mbps bitrate.ts (10-bit H.265 from DVB-S2 stream) – OK
  • 暗流涌动-4K.mp4 (10-bit H.264; 120 Mbps) – Plays at around 2 fps (as expected since it uses software decode as S912 does not support 10-bit H.264)
  • Ducks Take Off [2160p a 243 Mbps].mkv (4K H.264 @ 29.97 fps; 243 Mbps; no audio) – USB hard drive playback: Not smooth
  • tara-no9-vp9.webm (4K VP9 YouTube video @ 60 fps, Vorbis audio) – OK
  • The.Curvature.of.Earth.4K.60FPS-YT-UceRgEyfSsc.VP9.3840×2160.OPUS.160K.webm (4K VP9 @ 60 fps + opus audio) – Plays, but not always perfectly smooth as with all Amlogic S912 TV boxes.

It’s all good, except for one 10-bit H.265 video that won’t play smoothly at all. Other problems are related to limitation of Amlogic S912 processor like the lack of support for 10-bit H.264, and 4K H.264 is limited to 30 fps, and very high bitrate videos (~240 Mbps) cannot be played smoothly.

Sintel and AMAT ISO blu-ray files and 1080i MPEG videos could play just fine. Lower resolution Hi10p (10-bit H.264) could play, but 1080p was not that smooth:

  • Commie] Steins;Gate – NCED [BD 720p AAC] [10bit] [C706859E].mkv – OK for video, audio and subtitles
  • [1080p][16_REF_L5.1][mp3_2.0]Suzumiya Haruhi no Shoushitsu BD OP.mkv – OK for audio and susbtitles, but the video was not smooth

While my TV (LG 42UB820T) does not support 3D, but I played some stereoscopic 3D videos to find out if they could be decode:

  • bbb_sunflower_1080p_60fps_stereo_abl.mp4 (1080p Over/Under) – OK
  • bbb_sunflower_2160p_60fps_stereo_abl.mp4 (2160p Over/Under) – Stays in UI
  • Turbo_Film-DreamWorks_trailer_VO_3D.mp4 (1080p SBS) – OK

Some movies fron my library with various container/codec combination such as VOB, IFO, MKV, AVI, MP4 and MKV could all play just fine. However, I noticed some micro audio cuts in some videos with AC3 and HDMI audio pass-through enabled. I could not reproduce the issue with all videos, and using optical S/PDIF instead of HDMI solved the issue. Finally, I could play a complete 2-hour video. You’ll be all sample mentioned above here.

I’ve decided not to report Antutu Video Tester in my reviews, since Antutu appears to have stopped development, and the app has been removed from Google Play.

DRM Info results are however quite interesting.

Click to Enlarge

MINIX NEO U9-H supports both Widevine K1 and Microsoft Playready DRM, which means you could get full HD and 4K UHD resolution for some premium apps. However, it is not a certified Netflix device, so if you install Netflix app from Google Play, you’d still be limited to standard definition. However, as previously reported, you should be able to install a Netflix apk that allows HD resolution for any Widevine L1 capable device. I don’t have a Netflix account, so I have not tested myself. YouTube is working fine up to 1080p.

Network Performance (Wi-Fi and Ethernet)

I’ve transfered a 278MB file between a network share (SAMBA) and the internal flash for three times using ES File Explorer, and averaged the results in order to evaluate WiFi performance, testing both 802.11ac and 802.11n@2.4 GHz. Results are sadly underwhelming. [Update: WiFI performance is OK, but WiFi + SAMBA performance suffers. That’s likely an Amlogic Android SDK issue. See comments]

Throughput in MB/s – Click to Enlarge

I’ve highlighted both MINIX NEO U1 and NEO U9-H results in the chart above as they make use of the same Ampak module for WiFi, but I got much different results, despite the same testing conditions.

802.11ac performance was 2.3 MB/s on average, and 802.11n achieved 1.5 MB/s both of which are below average, but consistent with the performance I got with other Amlogic S912 devices.  The chart however makes it worse than it really is, because download speed was 5.6 MB/s for 802.11ac, and 2.1 MB/s for 802.11n, with upload transfer rate being much lower, and causing the average to be rather low. Note that WiFi results may vary a lot depending on your setup.

I repeated the same file transfer, but with a 885MB file, for Gigabit Ethernet, and the average performance (10.05 MB/s) is somewhat OK, but I got the same behavior as with MINIX NEO U1 with the transfer much faster for download (16.4MB/s) , and slower for upload (7.64 MB/s).

Throughput in MB/s – Click to Enlarge

Since in most case the eMMC flash is the bottleneck for file transfers over Gigabit Ethernet, I also ran iperf -t 60 -c server_ip -d to test raw dual duplex performance, and it’s not too bad:

Miscellaneous Tests

Bluetooth

MINIX NEO U9-H advertises itself properply as NEO U9-H, and not some other funny code, and I had no problems pairing it with Vernee Apollo Lite Android smartphone, and could transfer a few photos. I could also connect X1T bluetooth earbuds and used it while watching some YouTube videos. I skipped Sixaxais app testing (for PS3 gamepads) since the firmware is not rooted.

Storage

My USB hard drive has four partitions for NTFS, EXT-4, exFAT and BTRFS, and only the NTFS/exFAT partitions could be mounted. A FAT32 micro SD card could also be mounted

File System Read Write
NTFS OK OK
EXT-4 Not mounted Not mounted
exFAT OK OK
BTRFS Not mounted Not mounted
FAT32 OK OK

USB storage performance was tested with A1 SD bench app, and read performance was very good (for a USB 2.0 port) with both file systems, but as usual exFAT is very slow to write to @ 6.66 MB/s.

The results were very good for the internal storage with 119.86MB/s read speed and 45.99 MB/s write speed. Note that the read speed is cached, meaning it should be faster than if read directly on the storage device itself, but probably not that different considering theoretical read speed is 285 MB/s for the flash, probably lower for the eMMC controller in Amlogic S912.

Internal Storage Read & Write Speed in MB/s – Click to Enlarge

Overall I found that applications started fast, and I had no slowdown or “app not responding” due to I/O access to the eMMC flash.

USB Webcam

I connected the UVC webcam to the box shown in the first picture of this review, logged in to Skype, and successfully run the Echo/Service audio call test, and made a video calls. I had problems last year for MINIX NEO U1 on Google Hangouts, but NEO U9-H works perfectly well with Google Hangouts.

Gaming

Amlogic S912 is know a well known platform, as gaming works just as well as on other devices, if not better since cooling is well implemented.  First, I played Candy Crush Saga with NEO A2 air mouse, and switch to Tronsmart Mars G01 wireless gamepad to play Beach Buggy Racing using maximum graphics settings. Both games played perfectly smoothly. As with other Amlogic S912, Riptide GP2 is a bit more demanding, playing very smoothly with default settings, the framerate felt lower with maximum graphics settings, probably around 25 fps most of the time, with some drops to ~15 fps from time to time.

I also played both 3D racing games for a total of 30 minutes, and performance was constant throughout, meaning the large heatsink is doing its job in preventing CPU and/or GPU throttling.

MINIX NEO U9-H Benchmarks

CPU-Z correctly reports an octa-core Cortex A53 processor @ up to 1.51 GHz with a Mali-T820 GPU. The model number is NEO-U9-H (q200), with 10.89 GB internal storage, 14790 MB RAM, and a framebuffer resolution set to 1920×1080.

Click to Enlarge

The first time I ran Antutu 6.x, the device achieved about 38,500 points quite lower than 41,000+ points I got in most other Amlogic S912 TV boxes. I ran it a short time after boot, so maybe there was background tasks at the time, I retried later, I got a 40,543 points, more in line with other competing TV boxes.

I also ran Vellamo 3.x benchmark to double check for issues.

MINIX NEO U9-H achieved 1,239 points, 912 points and 2,338 points for respectively multicore, metal and Chrome Browser tests, which compares to 1,130, 1,012 points and 2,758 points (Not Chrome Browser, Stock Browser). Multicore results has a yellow mark because it failed one of the test, just like M12N, but not other Amlogic S912 boxes:

Sysbench issue with Finepar: Invalid CPU mode

Conclusion

MINIX did again a good job with MINIX NEO U9-H thanks to very good hardware, stable & responsive firmware implementation, working smoothly at all times thanks to good thermal design. 4K video playback works well, I think it’s the first time I see automatic frame rate switching work on Amlogic S912 processor,  and audio pass-through is working fine with TrueHD and DTS-HD. The first version of the firmware also has less bugs than the one I reviewed on MINIX NEO U1 media hub, and slightly better performance. NEO U9-H also adds new features such as HDR, 4K VP9 decoding, Dolby & DTS license used for audio downmixing in all apps, and DRM Widevine Level 1 + Microsoft PlayReady. The only real downside compared to NEO U1 is that WiFi performance is not quite as good, despite using the same Ampak wireless module.

PROS

  • Stable and responsive Android 6.0 OS
  • Video Output – HDMI 2.0 up to 2160p 60Hz; 24/25/30/50/60 Hz refresh rates supported; HDR should be supported too (not tested)
  • Very good Kodi 17 support with 4K H.265 (10-bit), VP9 and H.264 video playback,automatic frame rate switching
  • Dolby 5.1, Dolby+7.1, DTS HD and TrueHD audio pass-through working via HDMI and S/PDIF (for supported formats).
  • Dolby & DTS license means those audio formats work in all apps.
  • Well implemented power handling with off/standby/reboot mode, managed via an upgradable MCU, low off and idle power consumption
  • Widevine L1 and MicroSoft PlayReady DRM suppored
  • USB webcam working with Skype and Google Hangouts
  • OTA firmware upgrade with frequent update expected (based on previous models history)
  • Active support forums

CONS (and bugs)

  • Some videos with AC3 have micro audio cuts when HDMI pass-through is enabled, at least on my AV receiver. The problem goes away via optical S/PDIF
  • TrueHD dowmixing to stereo audio did not work in MX Player and Video Player apps.
  • WiFi performance is below average for both 802.11n and 802.ac, but similar to other Amlogic S912 TV boxes. Your mileage may vary. [Update: See comments’ section. WiFi performances looks, but combining SAMBA + WiFi is problematic. Likely an Amlogic Android 6.0 SDK issue]
  • List of apps shown in chronological order instead of alphabetical
  • A few videos do not play smoothly in Kodi but should: VP8 @ 1080p, one 10-bit HEVC video with no audio, “elephant dream” sample, “HD DVD” sample.
  • Potential buffering issue with some rare videos – Starts fast, plays for 1 or 2 seconds, buffers for 10 seconds then play again normally

If you’re going to spend the money on MINIX NEO U9-H, I really recommend you add NEO A2 Lite or NEO 3 air mouse, with the latter adding microphone input. Both air mice have the same design, feel comfortable in your hand, and work well as remote control, air mouse, and keyboard, as long as it’s for typing short texts like search query, user name / password, etc…

If you already own MINIX NEO U1, there’s probably little reason to upgrade, as performance will feel similar, except if you need 4K VP9, HDR, Widevine L1, or/and Microsoft PlayReady DRM support.

MINIX NEO U9-H media hub + NEO A3 air mouse sell for $159.90 / 149.90 GBP on Amazon US and Amazon UK, and are listed on GeekBuying, GearBest, and other online retailers with sales starting officially on March 3rd outside of Amazon.

Share this:
FacebookTwitterHacker NewsSlashdotRedditLinkedInPinterestFlipboardMeWeLineEmailShare

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK Pi 4C Plus

49 Replies to “MINIX NEO U9-H Media Hub Review – Part 2: Android 6.0 Firmware & Kodi 17”

  1. Fantastic in depth review CNX!

    I can confirm that passthrough to Atmos receiver works flawlessly from Kodi..
    I had better results with some of the Jellyfish files using the built in Movie Player app, in Kodi I saw some stuttering

    Shame about transfer rates and makes me wonder if a future FW upgrade will resolve the issue, bringing the box more inline with the U1

  2. Will never buy another minix. Paid large money and they drop support after a few months. No updates to higher Android releases so if you want kodi 17 have to buy a new box.

    1. Don’t be an ass…minix is the manufacturer that releases firmwares up to 2 years after release! You really don’t have a clue as of what you s going on with other manufacturers…
      Geez..

      1. What an idiot. I have a Z64 android which is not that old and still being sold for 174 on Amazon and has no updates which everyone would like so we can use kodi 17 but minix doesn’t have anything to say about it. So don’t call me an ass when you have no idea what your talking about.

  3. Hi there, i am wanting to connect to an AV Receiver, do you know if the new one passes through ALL of the following audio ON PLEX: 7.1, Dolby Atmos, Dolby:X, Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus and DTS-HD (High Resolution), as the previous Minix failed with many of these audio codecs/formats? many thanks.

  4. Great review as always but one thing i noticed in your review and in comments on kodi forum that this device dont support hdcp 2.2 so there is no chance to have ultrahd 4k streaming such as netflix or similar and price with delivery and customs clearance is almost as nvidia shield

    1. Everybody know that 99℅ of android boxes dony have android tv nor netflix hd..let alone 4k!! Coz of license issues!

    1. @CNXSOFT

      I beg to differ. In my experience with a Neo U1 that came with Android TV on it, the “interface,” or launcher, looked almost identical to what your screenshots depict.

  5. Minix has a track record of sticking with the Android OS that a device ships with.

    Their previous flagship product the X8H-Plus had ample time to get an Android Lollipop OS upgrade but Minix chose to stick with the older KitKat when Lollipop was freely available. Minix want you to upgrade hardware at least every two years it seems.

    Kodi users of those X8H-Plus devices are now unable to install the latest Kodi Krypton because of this.

    If you are looking at 4K Netflix with 5.1 Audio on any Android Box do yourself a favour and get an Android TV device that is guaranteed to work with these types of DRM streaming services properly with HDCP 2.2 and all the proper Approval certificates.

    Plus Netflix is MUCH easier to use with a simple Wireless Voice remote on a proper Android TV OS than the PITA regular touchscreen Netflix Tablet App like you would be using on this NEO U9.
    Try pausing and rewinding video with Netflix as one example of difficult, stupid, unfriendly Air Mouse control of the touchscreen Netflix App on a TV screen.

    For the price Minix are asking for the U9, I would rather buy a Android TV – nVIDIA Shield – with proven Android OS upgrade support – a device that is already running Android Nougat as well.

    1. @Mr. Netflixer

      Android TV sucks because of the app limitations. If you want to install an app that wasn’t made for Android TV, like 98% of them, you have to use a tool to download and sideload it.

  6. As usual, fantastic review. The inclusion of 10-bit H.264 and 10-bit HEVC testing samples is highly appreciated. I am still looking for the elusive player which can play HEVC and H.264 10-bit without issues.

  7. @emk2203
    10-bit H.264 is really difficult, as it’s almost never implemented in hardware. And the times it’s implemented in the SOC (e.g. RK3229), it still can’t play all videos depending on some parameters (refs).

    So you’d need a box powerful enough to decode 10-bit H.264 by software. If I remember correctly, Intel Apollo Lake mini PCs can do that for 1080p, and I suspect Cortex A72 based TV boxes should also be able to handle it.

    4K 10-bit H.264 is likely impossible on low cost hardware, as I currently only get 1 or 2 fps.

  8. @George
    I can’t find any Plex server for Android, only the client application is available for Android.
    I can see people have installed Plex Server on Raspberry Pi 2/3, so I might be able to install Plex server in MINIX NEO U9-H in a chroot, but you’d first need to root your box, then configure a chroot, and manually install Plex server.

  9. @Wayne
    It’s $134.9 on Amazon and it’s Microsoft who do the updates for Windows?
    What kind of updates are you looking for from MINIX?

  10. MINIX told me the HDCP 2.2 key is there, but not activated. It will be enabled with the next firmware. They are also working on improving the network performance in the next firmware update.

  11. Minix U9 review

    I’ve been using a U9-H here for about a month now and my views on it are mixed. Overall I think it’s a great device and works a treat with their A3 remote (though for me the A2 Lite I is better as it does away with the Microphone and Settings buttons in favour of Mute and Enter). I also have a Fire TV2 but I’m overseas at the moment and the Fire TV is useless to me since Amazon haven’t updated it’s firmware to support the Prime Video international service they provide. Hence me needing yet ANOTHER box – thanks Amazon – you won’t catch me a second time!!!

    My findings with the U9-H so far:

    Positives
    * Good build quality
    * Fast operating and works great with an air mouse remote like the A3 / A2 / A2 Lite (you really need one of these)
    * Stable with Kodi 17.1
    * Uses the Google Play Store and access to regular apps (not the more limited Android TV or Amazon offerings)
    * OTA updates for firmware fixes
    * Amlogic S912 Octa Core
    * 16GB memory
    * 2GB RAM
    * Runs Android 6.0.1 (adoptable storage)
    * Suggested it will get Android 7.1
    * 4K support
    * DTS support
    * Good future proofing (but see below re Android updates and the XE8)
    * Cool / silent running
    * 802.11ac 2 x 2 MIMO Dual-Band Wi-Fi and Gigabit Ethernet
    * Good wifi reception
    * Dual DRM Support – Play Ready 3.0 + Google Widevine Level 1

    Negatives
    * Minix apparently delayed the release of this as they wanted it near perfect out the box. It’s not. Not by a long way yet.
    * Picture quality (PQ) was so so at first, and at times awful. Lots of issues with colour space. Very dark picture with almost every app and Kodi. Fixed with FW004A.
    * Having tested the Fire TV side by side the picture quality for me seems mostly the same since they fixed the colour space issues but I think I’d still give the edge to the Fire TV, BUT
    * Amazon Prime Video is in SD only on Android mobile devices, and that’s 480! For travellers that’s still better than the Fire TV / Stick thought where there is NO prime at all!
    * Netflix is SD only. There is a HD apk that is pre-installed that supposedly provides higher quality. I uninstalled it and went with the Play Store version as the HD apk had loads of problems with ‘sorry we are unable to reach Netflix’ requiring box re-boots. The picture quality difference if any is barely noticeable. But if you NEED Netflix HD, this is not the box for you because AFAIK, even the HD app will be capped at 720 by the Netflix feed, regardless of what you hook it up to.
    * Real PITA to add Mac / Apple based SMB shares (but I think that might be down to Apple and their crap implementation of SMB – it’s just as hard to add on a Fire TV – yet another fad project Apple lost interest in – not Minix). You need to using the device IP address. Discovery and / or device name won’t work.
    * Not so sure whether Minix have a big enough development team to keep up with the development of Android or Kodi, compared to say Nvidia or Amazon. Smaller outfit. Less staff. Things break.
    * Currently problems with the You Tube apps and Hulu with screens spraying green / purple. The You Tube Android Mobile version they pre-install (they also install the Android TV version) broke after the Play Store offered an update. Minix’s response was to advise sticking with their pre-install! So, buy a Minix box and need to stick with, what will be over time, outdated apps is it? I’m quite happy to select older versions out of choice, NOT because I have to otherwise the box breaks!
    * Problems with auto frame rate switching in Kodi
    * Problems with pass-through. Apparently fixed in the next FW update. Looks like it was a problem with the DTS package.
    * Despite the promise of an update to Android 7.1, there’s concern now about the length of time Minix will support their boxes with many up in arms about the XE-8 Plus and the fact that you can’t install Kodi 17 (which requires Android 5) on it. The XE-8 AFAIK is stuck on v4 and, at the last check, was unlikely to be upgraded. That said, the Fire TV 2 is still on an Amazon forked Android 5! Of course, for Kodi 17 that’s high enough (and I’m only guessing here, but I imagine Amazon will upgrade Android to v6 or v7 over time).
    * The much acclaimed Minix support I’ve found to be so so. We already have apps breaking. Concerns exist over Android updates. Minix also have forums for support, problems and advise BUT they areVERY cliquey and quite a few requests, questions or problems just don’t get any response. One thread where a user asked a question about using a particular app just got locked with a link providing an email address for the developer! I mean seriously! Users can’t seek advice on the use of apps with your devices? I’ve also seen several reports of threads being removed etc. The moderators there treat it pretty much as their own personal chat room and spend more time stalking users and putting them down than answering queries from users. Woe betitde any user who choses to stand up to them as an otherwise quiet thread suddenly sees a flurry activity as their moderator chums pile in to pour on the grief. I’m not talking about moderation policy either. I’m talking the way they engage in discussions as members, their attitude is atrocious. I looked at the forums 2-3 times and decided not to even register there, I’ll sort any problems myself or get them from more generic forums. If forum support is of interest to you I’d take a look at the way threads go over there, not just the ones that do get answers, the dozens that don’t and have a look at how the mods behave. I’ve seen Nvidia Shield forums criticised in the past but IMO they are WAY better than those at Minix.

    Overall I find the U9 a good device, it’s more enjoyable and easy to use than the Fire TV IMO which has an overly ‘in yer face’ Amazon centric UI and a remote that won’t work with many side-loaded apps. The Fire TV I think is still good value IF you’re a heavy Amazon Prime Video user AND don’t want to use it outside of supported countries, the quality of the components and the overall box I think is good given it’s probably heavily subsidised by Amazon. I’m happy enough with the U9 for now but I think I’d have been happier with the U1 as it as had the benefit of 12 firmware updates. In 12 months I think it will be the case that the U9 was the better purchase decision. Just a question of waiting for it to mature, as with the U1. If you don’t need 4k or adoptive storage though I’d seriously consider the much more stable and well performing U1, IF you wanted to buy Minix or a generic box that is.

    As it stands now however, I’m buying a Shield, maybe move the U9 to the bedroom. Mainly because of:

    * Native Netflix HD
    * Native Prime Video HD
    * I prefer the Android TV interface for apps too, over and above the generic boxes that use Android Mobile, an interface designed to work with phones and tablets and for which you need an air-mouse to use well with a set top box.
    * More RAM / More powerful
    * Bigger programming team able to keep up with Android and Kodi developments better.

    If Amazon ever update their Fire TV to support their own international services I might pull the Fire TV 2 out of it’s box again and ditch the U9. As it stands at the moment, the Fire is useless.

    The U9 is good but for me I’d rather pay the extra and get the Shield.

  12. @Mysteron

    A nice write up. I particularly agree with your comments on Minix’s forum. Some of the staff are frankly a disgrace.

    In November 2015 I purchased a Neo U1 but returned it and purchased a Nvidia Shield instead. I’ve never looked back and it’s interesting to see it’s still far more powerful than any device other manufacturers have released since, including the U1 replacement under discussion here. It says a lot that Nvidia, with the updated 2017 model, didn’t even bother changing the SOC. It was the most powerful device in 2015 when it was released and it still is now. It might cost a bit more, but it’s worth the money. Especially when you do what I did and sell the controller and remote, meaning I ended up paying less than I originally did for the U1 anyway.

  13. I own a minix neo x-8 plus and I am very disappointed with this company support and lack of upgrade.
    It is not worth buying.
    Besides no body mention that in my minix I could not stream Netflix at full HD because the minix company didn’t pay to get their box register into the boxes that will be recognized to play full HD for register companies like netflix.

  14. Hi cnxsoft,

    I wanted to ask what TV model do you have? Since we never see HDR10 or Dolby Vision tests in your reviews.
    I’m interested in one of these S912(-H) boxes, specifically to run LibreELEC on, and I wonder whether Dolby Vision content would work on them or not (in either Android or LibreELEC).
    I have a S905X box and HDR10 works fine in both Android and LE, but I’m thinking about grabbing something that can do DV too, as my display supports it.

  15. Hey Guy’s,

    Some awesome info here. However I am none the wiser as to what to buy……

    Stripping it down to bare basics what is the top 3-5 media players you would recommend for movies and TV shows, in order of preference, that are current for 2017 that have largely got it right?

    Cheers Daryl

  16. Hi , and thank you for a very detailed review, i would also like to know what @Daryl H wrote is your top 5 media players other than shield. I also did a lot of reading reviews on this android tv boxes and would value your input.

    Thanks in Advance.

  17. Hello

    My minix u1 has buffeting issue when watching live stream football. Will minix u9 h has the same problem. Your help greatly appreciated! Thanks

  18. @Joddilui
    I don’t know the root cause of buffering while watching your live streams.
    A frequent issue is with the Internet itself, as it can be congested at places.
    Other reasons could be the implementation of the app you use is not optimal (maybe buffer too small?), the TCP buffer management of the firmware is not good enough, or if you are using WiFi, you are too far away from your router.

    Anyway, I doubt upgrading to MINIX NEO U9-H fixes any of those issues. If you are using WiFi, try with Ethernet to make sure it’s not a WiFi issue. If you have rooted our box, you may consider using Bionic TCP Buffer Tweak app:
    https://play.google.com/store/apps/details?id=com.spirilis.bionictcp&hl=en

  19. Hi cnxsoft,

    Thank you very much for your detailed review. You helped me to decide getting U9-H. I just need your help since I don’t know what to do anymore. Here it goes. I just bought UH-9 and connected it to my Samsung KS700 TV. Everything was working just fine until I connected my soundbar. I recently bought Sony HT ST9 (my preferred soundbar since it can decode DTS HD MA and Dolby TrueHD).

    Samsung KS7000 – 4 HDMI ports with 1 ARC (all HDCP 2.2)
    Sony HT ST9 – 3 HDMI Input (2 HDCP 2.2) and 1 HDMI Output (ARC)

    Here’s what I did, My TV is connected to the soundbar through TV HDMI IN (ARC) to Sounbdar HDMI OUT (ARC), then I connected UH-9 to Soundbar HDMI 1. Now the problem I can’t seem to get a video signal whenever I select HMDI 1 as Soundbar’s source, it says no Signal on the TV. From what I understood, it should work but for some reason it’s not working. I tried connecting UH9 to one of the TV HDMI input and I can get video and the sound plays through my soundbar. However, when I tried watching with a movie with DTS HD MA audio, I am not getting any sound from either the TV nor the soundbar.

    On my UH9, I enabled the HMDI passthrough option via Kodi 17.4. Do I also have to make changes to the UH9 setting?

    Please help me, your feedback is greatly appreciated. Thank you!

  20. @Adrian
    It looks like an interoperability issue.
    Maybe the Soundbar does not support the specific HDMI output mode you are using.
    Try changing resolution/refresh rateson NEO U9-H, and there may be setting related to RGB and YUV that you could play with.
    Also make sure that if you connect something else to your soundbar, such as another TV box or laptop, it works. If not, then it could be some settings in the soundbar.

  21. @cnxsoft Thank you for your response. I actually thought at first that the issue could be with the soundbar itself, but when I tried connecting my PS4 to the soundbar HDMI In and it worked. So I think it could be something about the settings that I have to look at and play with. But can you confirm that I actually have the correct setup? Thanks Man!

  22. @Adrian
    If you’ve connected NEO U9-H, the same way as you’ve connected your PS4, then the connection are fine. Try to change the settings I mentioned in the first post, and it might be a good idea to ask on minix forums if you can’t find a solution.

  23. @cnxsoft
    Hey, thanks Man. I really appreciate your help. I will play around the settings and hopefully it’ll work. I actually tried to sign up last night, but the page just goes blank whenever I submit. Perhaps, the forum is down or something. Thanks again!

  24. @cnxsoft
    I have the UB850V. Did you tried if a video file with HDR plays corectly with this device?
    All 4K movie files this days, have HDR, so, for a device declared 4K, it is most important to handle perfectly with HDR and to live-convert HDR to SDR. For the tests you mentioned, my TV plays better. Sorry for my english.

  25. @ETx1
    Bearing in mind the review was made in March of last year, and HDR videos would play with dimmed colors on my non-HDR 4K TV. I don’t know the status of the firmware today.

  26. You wrote:
    “As expected, MINIX NEO U9-H dissipate power well thanks to its large heatsink. I measured 36°C and 37°C respectively on the top and bottom of the case after Antutu 6.0, and the temperature went up to 44°C and 49°C after playing a 2-hour 1080p H.264 video in Kodi, and 47°C and 54°C after playing and Beach Buggy Racing & Riptide GP2 for around 30 minutes. I quickly went to CPU-Z after exiting the game, and found the CPU temperature was 71°C.”

    What was the temperature in the room, where you tested the Minix ?

    Reason for the question is, I fear, it will get too hot in use.
    I do not have aircon in my living room, so the temperature there is normally between 30 and 35 degrees celcius.

    Do you think, it will be a problem ?

  27. Dear Jean-Luc, could you help me? I am trying to find a mounted USB HDD on the Minix in my network. I managed to connect to the Minix it self (folder U9_H) but not wit the HDD. I would like to use my mac to copy files to the HDD. Any thoughts?
    Thanks
    Michiel

Leave a Reply

Your email address will not be published. Required fields are marked *

Khadas VIM4 SBC
Khadas VIM4 SBC