Unboxing of Cloud Media Open Hour Chameleon Android Media Player

Cloud Media (previously Syabas) recently announced Open Hour Chameleon Android media player powered by Rockchip RK3288 processor. Compared to the many competing solutions based on Rockchip’s quad core Cortex A12/A17 processor, Open Hour comes with a metallic case to provide better casing, and instead of coming with internal NAND or eMMC flash, they provide a bootable SD card (Class 10) pre-loaded with Android 4.4.2, and they also have a preliminary Lubuntu image. They also recommend to use SPMC for video playback as “going forward, Rockchip will fully support SPMC instead of their custom Kodi”. Before writing the full review, I’ll show some pictures of the device, and take it apart to check out the hardware and their thermal dissipation solution.

Open Hour Chameleon Unboxing

I’ve received the box by Fedex in the following package.
Cloud_Media_OpenHour_Chameleon_PackageThey list the key features on the top of the box namely RK3288, XBMC,  Android Kitkat, H.265/HEVC codec, and 4K UHD support. On the bottom of the package, the specifications are listed in several European languages, and they have hidden 2.0 in HMDI 2.0, which probably means the box only supports HDMI 1.4 (up to 4K 30 Hz), but it’s not something I’ll b able to test since I don’t own a 4K UHD TV.

Open Hour and Accessories (Click to Enlarge)

The device comes with an Infrared remote control with IR learning function, two AAA batteries for the remote, a 8GB class 10 SD card pre-loaded with Android 4.4, an HDMI cable, a 5V/2A power supply, a quick start guide, and a warranty card. The quick start guide lists the content of the box, links to the box’ Wiki, Forum, and Support, explains that you must connect the box to your HDMI TV (doh!), shows how to use the IR remote control learning function so that you can use it with both the box and your TV. [Update: the final quick start guide will be different]

OpenHour Chameleon (Click to Enlarge)
OpenHour Chameleon (Click to Enlarge)

The box is entirely made of aluminum, and comes with two LEDs and the IR receiver window at the front, an SD card slot (for OS), and a USB 2.0 host port on one side, with most ports being available at the back of the enclosure: an optical S/PDIF output, a seldom found coaxial S/PDIF output, a Gigabit Ethernet port, an USB 2.0 port, a micro USB OTG port, a micro SD slot, HDMI output, yet another USB 2.0 host port, an On/Off switch, and the power jack.

If you prefer watching an unboxing video, here it is…

Open Hour Chameleon Board and Enclosure Pictures

Contrary to other boxes, you need to use a “standard” screwdriver, i.e. not a precision screwdriver, to open the box,. There are four screws on the bottom of the enclosure, and two on the rear panel. After you’ve removed the first four screws, you can slide the bottom panel.

Bottom of OpenHour Chameleon Board
Bottom of Open Hour Chameleon Board

The only noticeable item on the bottom of the PCB is the micro SD slot. There’s also a sticker with the MAC address, which starts with 00:06:DC which belongs to … Syabas. So it looks like Cloud Media (Syabas) is indeed which has designed the box, and it’s not one of these companies that take a design from a company, re-brand it, and (sometimes) provide some extra support.Let’s untighten the four screws holding the board, and take out the rear panel. But when I try to pull the board out of the box, I feel some resistance.

openhour_chameleon_thermal_designThat’s because they’ve really done a proper thermal design, and contrary to many companies they don’t use a metallic case, and leave a big gap of air between hot chips and the enclosure, but instead the board is actually connected to the case. Big shock! It’s the first time I see a proper thermal design with an Android TV box!

OpenHour_RK3288 Board and Enclosure / Heatsink (Click to Enlarge)
Open Hour_RK3288 Board and Enclosure / Heatsink (Click to Enlarge)

I can finally take the board out by pulling a little stronger. You can clearly see the aluminum heatsink screwed to the metallic enclosure, and a thermal pad between the heatsink, and a metallic shield use to dissipate heat and maybe? for EMC purposes. I’ve taken the shield out gently with a precision screwdriver, but you’d really better avoid doing this, or do it with plastic parts.

OpenHour Board (Click to Enlarge)
Open Hour Board (Click to Enlarge)

The board is named OPENHOUR_3288_V1.1, so it has definitely been designed by Cloud Media, or at least for the company, and manufactured/designed on 2014/09/15. You’ll also notice the thermal pads on top of the shield to provide thermal conductivity with Rockchip RK3288 SoC, and the four DDR3 chips (SK Hynix H5TQ4G63AFR) providing 2GB RAM. The serial pins (GTR) are available between the IR receiver and LEDs on the bottom left of the board. The board can support eMMC flash, but the company chose instead to boot the device from an SD card. There’s also some unpopulated zones on the left of the board, but I’m not sure what these may be for. The PMIC is Active Semi 8846QM, the Gigabit Ethernet transceiver is a Realtek one, but I forgot to note the part number. There’s no Wi-Fi/Bt module, so if you want Wi-Fi or Bluetooth you’ll need to use a wireless USB dongle.

That’s all for today. I’ll write the review with Android in a few days or next week, and I’ll probably give a try at there Lubuntu image too in a separate post.

Open Hour Chameleon is available for $149 on Cloud Media Store. Shipping is scheduled for December 5, 2014, but it’s actually their 7th batch, so quite a few Chameleons have already been shipped. I could also find it on Ebay, and if you live in German it’s listed on Amazon DE for 159 Euros. Cloud Media also sells a Wi-Fi/Bluetooth module for $21.90.

Share this:
FacebookTwitterHacker NewsSlashdotRedditLinkedInPinterestFlipboardMeWeLineEmailShare

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK Pi 4C Plus

13 Replies to “Unboxing of Cloud Media Open Hour Chameleon Android Media Player”

  1. @embedded_geek
    I’m now trying to sell some already reviewed devices locally to gather some funds. But the cheapest 4K TV is $800, and one supporting HDMI 2.0 apparently around $1,200, or maybe I have not looked enough. So a more realistic goal for now is to get $500 to buy an AV receiver to test HDMI / S/PDIF pass-through.

    If somebody is interested in buying a device, I try to sell it for 60% of the price listed on sites like GeekBuying / dx.com, + shipping ($10 to $25 depending on weight).

    Yes, correct the GTR pins should be for the serial console.

  2. @cnxsoft
    I’m waiting for the january sales but I’m pretty sure I can get a 4K TV Full connected for around 500€. Today the TV LG 49UB820 UHD was at 600€ for example (in France)

    I’d buy any device running XBMC(Kody…) that plays H.265/H.264 at 4K@30fps flowlessly. (4K@60fps if possible but I doubt…). If it can help you, I’d be glad, because blog that shows impartiality for devices test are pretty rare!

  3. Why don’t you try to sell some blog space to advertisers so you can fund some test equipment??
    Selling the devices they give you, may be the easiest route, but it is not the right way to do it…

  4. Poor introduction to XBMC/Kodi for Cloud Media who are already gaining a crappy reputation on the Kodi community forum because their own gun-ho community moderators and fanboys from the NMT forums all created accounts and began harassing people who spoke bad about Syabas products or recommended a other product instread, and banning anyone from NMT forum if they wrote anything negative on the Kodi forums.

    Bottom line is don’t believe what anyone says, none of these boxes are mature or stable, and we all take a risk as early adopters of being their beta testers, even if they are marketing it as a finished product.

    Con here anyway is that Cloud Media / Syabas have not yet proven itself to have any good Android firmware developers of their own, which we here know is really a must with Rockchip based products. You can not rely on Rockchip to provide you with a turnkey image which can be used without some heavy modifications.

    PS: SPMC = almost official Kodi exprimental pre-alpha builds, as koying its main developer is a member of team Kodi he tests out exprimental code in SPMC first before pushing it upstream to Kodi.

  5. @embedded_geek
    I don’t have any device that can play 4K H.265 flawlessly yet.

    @Ray Donnelly
    Thanks, but I consider the purchase of AV receiver / 4K TV, and blog monetization, two separate subjects.
    I already have some ads above, so I don’t feel asking for donation to run the blog.

    Maybe I’ll organize something in January, selling boxes at a discount, and asking for donations for people who would like me to test 4K or/and HDMI / S/PDIF pass-through in order to buy the hardware required. Since I would use Paypal, I could provide refund if I don’t reach the minimum funding target.

  6. @cnxsoft I would like to buy a device based on either S812 or RK3288. I need it basically for playing videos, streaming and for my kids playing games. I am from India.

Leave a Reply

Your email address will not be published. Required fields are marked *

Khadas VIM4 SBC
Khadas VIM4 SBC