TV01II Android Media Player with Rockchip RK3288 Processor Sells for $53 (Promo)

I’ve been informed that GeekBuying is running a promotion for a Rockchip RK3288 TV Box called TV01II that normally sells for $75.99, but you can follow this link, apply PAYPALSALE coupon, and pay by PayPal to get it for just $53.19 including shipping by registered mail. [Update: The product is now out of stock].

TV01II specifications:

  • SoC –  Rockchip RK3288 quad core ARM Cortex A17 processor @ 1.8GHz with ARM Mali-T764 quad-core 3D GPU with support for OpenGL ES 3.0, OpenCL 1.1, and DirectX11
  • System Memory – 2GB DDR3
  • Storage – 8GB NAND Flash + micro SD slot
  • Video Output – HDMI 1.4 up to 4K @ 30fps, AV port
  • Audio I/O – HDMI, AV,  and optical S/PDIF, built-in MIC.
  • Video Codecs – MPEG-1, MPEG-2, MPEG-4,H.263, H.264, H.265,AVS, VC-1,RV, VP6/VP8, Sorenson Spark, MVC 3800 x 2160P 60FPS
  • Audio Codecs – MPEG1, MPEG2 (Layer I/II), MP3, AC3, E-AC3, AAC-M4A, WMA, M4A, etc…
  • Connectivity – Gigabit Ethernet, dual band 802.11 b/g/n Wi-Fi and Bluetooth 4.0 (AP6330)
  • USB – 4x USB 2.0 host ports including one OTG port.
  • Misc – Power LED, reset button, and IR receiver.
  • Power – 5V/2A
  • Dimensions – N/A
  • Weight – N/A

The box runs the usual Android 4.4.2, and ships with a 5V/2A power adapter, an IR remote control, HDMI and AV cables,a USB cable for the OTG port, and a user’s manual. The stock firmware (TV01II_0916-T032_AP6330_public_20140910.rar, password: geekbuying.com) has been released, but no other updates have been provided since September, so I’m not sure you should expect further updates. I can’t find any review either, but others on Freaktab may have decided to buy it.

Thanks to Christophe for the tip.

Share this:

Support CNX Software! Donate via PayPal or cryptocurrencies, become a Patron on Patreon, or buy review samples

22 Replies to “TV01II Android Media Player with Rockchip RK3288 Processor Sells for $53 (Promo)”

  1. just bought 3 of them hope there is no problem with F/W i will try to sell them and make enough money to buy more goodies 🙂

  2. Wenle Z., i need to put linux on it too (for metadata and monitor services of home ceph cluster). If you succeed to put linux on it, please share your knwoledge :).

    ps : happy to have shared this offer with cnx-software community 🙂

  3. @fossxplorer
    It might. At least now, you can try to boot Linux from SD card relatively safely, and without messing with the Android firmware in the internal flash. But not everything might work, including Wi-Fi, audio, and the usual drivers for GPU and VPU.

  4. i just got one of the three boxes today and hope that the other two will come soon. i also noticed there are 4 usb 2.0 ports and on one them it says otg so thats the onee we will use when flashing and they also sent out a usb 2.0 to usb 2.0 cable which is nice i did not have one of those. will test the box today and see how it performs.

  5. so far all is good video playback is very good although i did not test everything all i did was play videos from my nas box and xbmc and all was good. the firmware is very stable and fast also wifi performance is very good.

  6. i wish the same promo came back then i would but 5 more he he only couse i dont have too much money if i did i would buy atleast 20 🙂

  7. Today flash firmware from MK902II, 1st look all work fine.
    WI-Fi – OK
    Bluetooth – OK
    Lan – OK
    irda remote – OK

  8. I haven’t able to compile a linux image for my TV01II TV box. Im really new to these arm device, and lack the skill. Anyone else tried other devices’ firmware on the TV01II?

Leave a Reply

Your email address will not be published.

Advertisement
Advertisement