NanoCOM-APL Apollo Lake COM Express Module is Designed for Machine Vision & Factory Automation

AAEON has just launched  NanoCOM-APL, a Type 10 COM Express module based on Intel Apollo Lake Atom, Celeron, or Pentium processor with up to 8 LPDDR4 memory, and on-board support for dual MIPI CSI interfaces.

The module is designed for machine vision and factory automation, and also features Gigabit Ethernet, optional on-board eMMC flash, PCIe x4, ten USB interfaces, and more.

NanoCOM-APL Apollo Lake COM Express Module

Apollo Lake COM Express ModuleThere are currently three variants of NanoCOM-APL module with the following specifications specifications:

  • SoC
    • NANOCOM-APL-A10-0001 – Intel Pentium N4200 quad core Apollo Lake processor @ 1.10 / 2.50 GHz with Intel HD Graphics 505; 6W TDP
    • NANOCOM-APL-A10-0002 – Intel Celeron N3350 dual core Apollo Lake processor @ 1.10 / 2.40 GHz with Intel HD Graphics 500; 6W TDP
    • NANOCOM-APL-A10-0003 – Intel Atom x7-E3950 quad core Apollo Lake-I processor @ 1.60 / 2.00 GHz with Intel HD Graphics 505; 12W TDP
  • System Memory – A10-0002: 2GB LPDDR4; A10-001 & A10-003: 4GB LPDDR4
  • Storage – SPI flash for BIOS, optional eMMC 5.0 flash (A10-003: 32 GB, no flash by default for other two models)
  • Other on-Board Chips
    • Intel I210IT GbE transceiver
    • ITE IT8528 embedded controller
    • NXP DP to LVDS PTN3460 chip
  • COM Express Board-to-Board Connector withNanoCOM-APL COM Express Module
    • Display I/F – LVDS LCD/eDP, 1x DDI
    • Audio – High Definition Audio Interface
    • Networking – Gigabit Ethernet
    • USB – 8x USB 2.0, 2x USB 3.0
    • Serial Port – 2x TX/RX
    • Storage – 2x SATA 2 interfaces
    • 3x PCI Express x1
    • LPC Bus, SMbus
    • 8x GPIOs
  • Misc – Watchdog timer (255 levels)
  • Form Factor – COM Express, Mini size, Pin-out Type 10
  • Power Supply – Standard : +12V, AT/ATX (Optional: +5V, AT/ATX)
  • Dimensions (L x W) – 84mm x 55mm (COM Express, Mini size, Pin-out Type 10 form factor)
  • Temperature Range – Operating: 0 °C ~ 60 °C or -40 °C ~ 80 °C; storage: -40°C ~ 80°C
  • Humidity – 0% ~ 90% relative humidity, non-condensing
  • MTBF – 80,000 hours
  • Certifications – CE/FCC
    NanoCOM-APL Block Diagram
    Click to Enlarge

    The company provides the BIOS and Windows 10 64-bit drivers for the module, and offers optional accessories such as a heat spreader and a CPU cooler (fan).

ECB-920A COM Express Carrier Board

The modules are also compatible with the company’s universal COM Express Type 1/6/10 carrier board (ECB-920A) pictured below.

COM Express Type 1/6/10 Carrier Board
Click to Enlarge

Key features for ECB-920A board:

  • Supports COM Express Module Rev. 2.1 Pin-out Type 1/6/10
  • Storage – 4x SATA Ports
  • Display – Up to 24-bit Dual Channel LVDS Connector, DP, VGA
  • Audio – High definition audio; Line-in, Line-out, Microphone jacks
  • Connectivity – Gigabit Ethernet (RJ-45)
  • USB – 8x USB 2.0 x 8, USB 3.0 x 4
  • Expansion – 4x PCI-Express x1 slots (3 by PCI-E x1 pin-out, 1 by SIO pin-out) , 1x PCI-Express x4 slot, 1x PCI-Express x16 slot,  1x Mini-Card slot
  • Misc – LPC connector, 2x RS-232 port, front panel header, etc…
  • Power Supply – ATX Power Input
  • Dimensions – 304mm x 244mm (ATX Form Factor)

Both the modules and carrier board are available now at an undisclosed price. You’ll find more details on their respective product pages here and there.

Share this:
FacebookTwitterHacker NewsSlashdotRedditLinkedInPinterestFlipboardMeWeLineEmailShare

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK 5 ITX RK3588 mini-ITX motherboard

Leave a Reply

Your email address will not be published. Required fields are marked *

Khadas VIM4 SBC
Khadas VIM4 SBC