Hardware Category - Page 660 of 1063 - CNX Software

March 19, 2017March 19, 2017 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Mecool KM8 P Amlogic S912 TV Box Runs Android 7.1 Nougat, Sells for $39 and Up

We’ve already written about Android 7.1 on Amlogic earlier with week with an overview of the system and SDK from a developer, and there were some issues and user interface inconsistencies. However, I’ve just seen GeekBuying is now taking order for Amlogic S912 powered Mecool KM8 P TV box running Android 7.1 for $38.99 and up. Mecool KM8 P specifications: SoC – Amlogic S912 octa-core ARM Cortex A53 processor @ up to 1.5 GHz with ARM Mali-820MP3 System Memory – 1 or 2GB DDR3 Storage – 8 or 16GB eMMC flash and micro SD slot up to 32GB Video & Audio Output – HDMI 2.0a up to 4K @ 60Hz with CEC and HDR support, and 3.5mm AV port (composite + stereo audio) Connectivity – 10/100M Ethernet, WiFi 802.11 b/g/n USB – 2x USB 2.0 ports Misc – IR receiver, status and network LEDs Power Supply – 5V/2A Dimensions – […]

March 18, 2017 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

UP Core is a Low Cost & Compact Intel Maker Board Powered by an Atom x5-Z8350 SoC (Crowdfunding)

The UP community has already launched Intel Cherry Trail and Apollo Lake boards in the past with UP Board and UP2 (squared) boards, and they are now about to launch a cheaper and smaller board called UP Core powered by Intel Atom x5-Z8350 processor with to 1 to 4GB memory, up to 64GB eMMC flash, HDMI, USB 3.0, … and I/O expansion connectors. UP Core specifications: SoC – Intel Atom x5-Z8350 “Cherry Trail” quad core processor @ 1.44 GHz / 1.92 GHz (Burst frequency) with Intel HD 400 graphics @ 200 / 500 MHz System Memory – 1, 2 or 4 GB DDR3L-1600 (soldered on board) Storage – 16, 32, or 64 GB eMMC flash, SPI flash ROM Video Output / Display – HDMI 1.4 port, full eDP (embedded DisplayPort) connector Audio I/O – Via HDMI, and I2S Connectivity – 802.11 b/g/n WiFi @ 2.4 GHz, Bluetooth 4.0 LE (AP614A) […]

March 17, 2017March 18, 2017 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

$18.9 Orange Pi Zero Plus 2 Board: Allwinner H3, WiFi + Bluetooth LE, HDMI and 8GB eMMC Flash

When will they ever stop? Shenzhen Xunlong has launched yet another Allwinner H3 board called Orange Pi Zero Plus 2, that has not that much in common with Orange Pi Zero, since it uses a different processor (H3 vs H2+), adds HDMI, and implements WiFi and BLE via an Ampak AP6212 module.Orange Pi Zero Plus 2: SoC – Allwinner H3 quad core Cortex A7 processor @ 1.2 GHz with Mali-400MP2 GPU @ 600 MHz System Memory – 512 MB DDR3 SDRAM Storage – 8GB eMMC flash + micro SD card slot Video Output – HDMI port with CEC support Connectivity – 802.11 b/g/n WiFi + Bluetooth 4.0 LE (Ampak AP6212) with u.FL antenna connector and external antenna USB – 1x micro USB OTG port Camera – MIPI CSI port Expansion headers – Unpopulated 26-pin “Raspberry Pi B+” header + 13-pin header with headphone, 2x USB 2.0, TV out, microphone and […]

March 17, 2017March 17, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Dell Edge Gateway 3000 Series Are Powered by Intel Bay Trail-I SoCs for Automation, Transportation, and Digital Signage

Dell has recently introduced Edge Gateway 3000 series with three models powered by Intel Bay Trail-I processor, running Ubuntu Core 16 or Windows 10 IoT, with each model targeting respectively general-purpose automation, transportation & logistics, and digital signage and retail. The specifications for the three models can be found in the table below. Dell Edge Gateway 3001 Model for General-Purpose Automation Dell Edge Gateway 3002 Model for Transportation & Logistics Dell Edge Gateway 3003 Model for Media & Retail Kiosks SoC Intel Atom E3805 dual core processor @ 1.33 GHz (3W TDP) Intel Atom E3815 single core processor @ 1.46 GHz with GPU @ 400 MHz (5W TDP) System Memory 2 GB DDR3L-1066 Storage 8 or 32 GB eMMC flash Industrial-grade Micro-SD card: 8GB / 16GB / 32 GB / 64 GB Connectivity 1 x 10/100 Fast Ethernet (RJ-45) with PoE (15.4W) WiFi 802.11 b/g/n Bluetooth 4.0 LE Optional ZigBee […]

March 16, 2017 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

SupTronics X800 2.5″ SATA Drive Expansion Board and Cases for Raspberry Pi 2/3 and ODROID C2 Boards

I wrote about SupTronics expansion boards for Raspberry Pi a few year ago. Those add features like WiFi, Bluetooth, RTC, SATA, VGA, S/PDIF, etc… I’ve just stumble upon a new model Suptronics X800 specifically designed for 2.5″ SATA hard drive and SSDs that I found on DealExtreme for $32.73 with a 5V/4A power supply, or $21.43 with just the expansion board and accessories. SupTronics X800 board features: SATA connector for 2.5″ SATA drivers up to 1TB implemented via GL830 USB to SATA bridge HDMI port – Duplicate Raspberry Pi HDMI output USB – Connects to Raspberry Pi Power Supply 5V via 5.5/2.5 power jack Optional & recommended power supply – AC 100 – 240V input ~50 / 60Hz, 5V/4A output with US and EU snap plugs Powers the Raspberry Pi, i.e. a USB power supply is not needed Dimensions – 109mm x 85mm Compatibility – Raspberry Pi Model B+, […]

March 16, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

ACEMAX Sells Amlogic S905X TV Boxes with LibreELEC, or Dual Boot LibreELEC + Android 6.0

There are plenty of Android TV boxes powered by Amlogic S905X processor on the market, but ACEMAX has apparently decided to leverage the community’s work on LibreELEC, and launched two “ACEMAX LE” models with 1GB RAM/8GB flash or 2GB/16GB that runs LibreELEC sold on Aliexpress for respectively $39.99 and $57.99 shipped. You can also buy the second model with a dual boot Android 6.0 + LibreELEC firmware for $59.99 including shipping, instead of only running LibreELEC. The company uses both “OpenELEC”, “LibreELEC” and “Pure Linux”, but the video demo embedded at the end of this post shows clearly the box booting LibreELEC 7 with Kodi 16.1. ACEMAX LE TV box specifications: SoC – Amlogic S905X quad core ARM Cortex-A53 @ up to 1.5GHz with penta-core Mali-450MP GPU System Memory – Model 1: 1GB RAM; model 2: 2GB RAM Storage Model 1: 8GB eMMC flash + micro SD card slot Model […]

March 16, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

MYiR Tech MYC-JA5D2X System-on-Module is Powered by Microchip ATSAMA5D2 Cortex A5 Processor

MYIR Tech has released MYC-JA5D2X system-on-module powered by a Microchip Atmel SAMA5D2 ARM Cortex A5 processor with 256MB flash, and 256 MB DDR3. The module relies on a SO-DIMM edge connector to expose the camera interface, Ethernet, USB, camera, and other I/O signals. MYC-JA5D2X CPU module specifications: SoC – Atmel SAMA5D26 or SAMA5D27 ARM Cortex A5 processor @ up to 500 MHz with 128KB L2 cache System Memory – 256MB DDR3 SDRAM Storage – 256MB NAND flash, 4MB data flash, 64KB EEPROM Connectivity – On-board 10/100M Ethernet PHY 200-pin SO-DIMM edge connector with: 1x Ethernet 1x USB Host, 1x USB Device, 1x USB HSIC (HSIC is only for SAMA5D27) Up to 10x serial ports, up to 2 x CAN (only for SAMA5D27) Up to 7 x I2C, up to 7 x SPI Up to 2 x QSPI 12 x 12-bit ADC (enhanced resolution up to 14 bits) 4x PWM 1x […]

March 15, 2017March 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

$44 A5X Plus Mini TV Box Runs Android 7.1 on Rockchip RK3328 Processor

Rockchip introduced RK3328 processor for TV boxes at CES 2017. The processor is based on a quad core Cortex A53 processor and a Mali-450MP is some other competitors such as Amlogic S9xx series, but what made the processor stand out is that it already supports Android 7.1, and includes a USB 3.0 port. A5X Plus Mini is one of the first TV box based on the processor, and the first “Chinese” TV box I’ve seen running Android 7.x Nougat. A5X Plus mini specifications: SoC – Rockchip RK3328 quad core Cortex A53 processor @ 1.5 GHz with Mali-450MP GPU System Memory – 1GB RAM Storage – 8 GB eMMC flash + micro SD card Video & Audio Output – HDMI 2.0a up to 4K @ 60 Hz with HDR10 and HLG support, 3.5mm AV port with composite video and stereo audio Video Codec – 4K VP9, H.265 and H.264. 1080p VC-1, […]