Android Category - Page 351 of 443 - CNX Software

June 21, 2013June 21, 2013 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

$25 Babuino Stick & Board Let You Control Your Devices with Your Smartphone and Vice Versa

Babuino Stick and Babuino Board are tiny low cost Arduino-compatible USB dongle and board featuring Atmel AVR MCU, and Bluetooth 2.0 + EDR connectivity. Both have basically the same hardware, but Babuino Stick is more suited to control a computer or Smart TV via your smartphone, and Babuino Board can be used for robotics and automation projects. The device can also be used to control your smartphone (e.g. to write SMS) from your PC or Mac. Here are the specifications of these “Babuini”: MCU – Atmel ATXMega128A1 @ 32 MHz with 128KB flash program memory, 8KB boot code section, and 8KB SRAM. Master/Slave selectable Bluetooth 2.0 + EDR module Infrared transmitter and receiver USB – micro USB (board) and USB port (stick) User and reset push-buttons Headers (Board only) – ICSP pins, ADC & DAC, PWM, I2C & SMBus, SPI and UART LEDs – Bluetooth and User LED for both, […]

June 21, 2013June 21, 2013 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Samsung Unveils ATIV Q Android & Win8 Convertible Tablet, Galaxy NX DSLR Camera Running Android 4.2

Samsung Premiere 2013 took place yesterday in London, and the company announced 9 new products at the event. But 2 devices really stood out for me: ATIV Q – A 13.3″ tablet convertible to a notebook that runs Windows 8 and Android 4.2.2 simultaneously. Galaxy NX – a DSLR Camera running Android 4.2.2 supporting interchangeable lenses. Galaxy S4 Active was also interesting as it’s compliant with IP67, which means it’s dust proof and water resistant, so you don’t have to worry about dust / sand getting into the device, or dropping it into the water. It can stay under in 1 meter of water for 30 minutes, and even though the touchscreen won’t operate under water, you can still take underwater pictures during your snorkeling trip. Don’t expect it to work for diving though. Samsung ATIV Q (Preliminary) Specifications: Processor – Intel Core i5 (Haswell) GPU – Intel HD Graphics […]

June 20, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Mele M9 Android Set-top Box Powered by AllWinner A31

After Mele A1000G Quad, Mele has just launched another model called M9, still based on AllWinner A31 quad core processor, with an external Wi-Fi antenna, but no SATA support. Mele M9 specifications: SoC – AllWinner A31 quad core Cortex A7 @ 1.5GHz + PowerVR SGX544MP2 GPU System Memory – 2GB DDR3 RAM Storage 16GB NAND Flash SD card slot Video Output – HDMI 1.4 Audio I/O – HDMI + S/PDIF optical out + Audio jack output Video Playback – Up to 2160p @ 60 Mbps USB – 3x USB 2.0 host ports, 1x mini USB 2.0 OTG port Connectivity Ethernet – 10/100Mbps Wi-Fi – 802.11 b/g/n Power Supply – 5V/2A The device runs Android 4.1 with a customized “Windows 8” user interface, and comes with a 5V/2A power adapter, an IR remote control (show below), an HDMI cable, a user’s manual, and a warranty card. The remote above as a […]

June 19, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Cubieboard2 Powered By AllWinner A20 is now Available for $59

Cubieboard is a low cost board based on AllWinner A10 with lots of ports and expansion pins, that supports Linux and Android. There’s now a new version called Cubieboard2 based on the same board but powered by AllWinner A20 dual core Cortex A7 processor instead, and still with 1GB RAM and 4GB Flash. As you can see the specifications are the same as the original Cubieboard except for the SoC: SoC – AllWinner A20 Dual core ARM Cortex-A7 processor with Mali-400 MP2 GPU System Memory – 1GB DDR3 Storage – 4GB internal NAND flash, up to 64GB on micro SD slot, and up to 2TB on 2.5″ SATA disk Video Output – HDMI Connectivity – 10/100M Ethernet, plus optional Wi-Fi module USB – 2x USB 2.0 HOST, 1x USB 2.0 OTG Expansion headers – 96 pins including I2C, SPI, RGB/LVDS, CSI/TS, FM-IN, ADC, CVBS, VGA, SPDIF-OUT, R-TP, and more Misc […]

June 19, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

Qualcomm Snapdragon 800 MDP Benchmarks

A few days ago, I saw some benchmark results showing Xiaomi M3 smartphone powered by Snapdragon 800 SoC getting a ridiculous score above 80,000 points in Antutu, but thought it was really odd, and it turned out to be a fake Antutu screenshot. The actual scores for Snapdragon 800, are much lower, yet one of the fastest mobile platform ever, according to benchmarks performed by Engadget, which hold of Qualcomm Snapdragon 800 Tablet and Smartphone MDPs. Engadget provided comparison of the benchmark for 12 devices, but I selected the 4 most powerful of the lot in the table below. S800 MDP tablet (MSM8974) S800 MDP phone (MSM8974) Samsung Galaxy S4 (Exynos 5 Octa) Nvidia Tegra 4 ref device Quadrant 2.0 20762 22022 13326 16436 Vellamo 2.0 2997 2914 1977 N/A AnTuTu 3.x 35783 33828 28167 36305 SunSpider 0.9.1 (ms) 543 566 732 499 SunSpider 1.0 (ms) 657 674 N/A N/A […]

June 17, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Rockchip RK3168 Powered Tablets Are Starting to Show Up for Sale

Rockchip first showcased a tablet prototype with RK3168 dual core processor at the Hong Kong Electronics Fair in April, showing lower power consumption compared to RK3066. At the time, tablets based on this processor were still in development, but this has changed as a few RK3168 tablets are now showing up in Aliexpress. Prices for 7″ Android tablets such as Cube U25GT PRO, are now about $110 as low as $75 including shipping, but this should come down as more sellers provide the devices. Cube U25GT PRO is an updated version of the U25GT pictured above. Here are the specifications of the PRO version: SoC – Rockchip RK3168 @ 1.2 GHz with PowerVR SGX540 GPU System Memory – 512 MB RAM Storage – 8GB NAND Flash + micro SD card slot Display – 7″ 5 point touch capacitive screen (1024×600) Camera – 0.3MP front camera Connectivity – Wifi 802.11b/g/n + […]

June 17, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

iPazzPort SY-20-19VC Android STB is also a Remote Control Charging Dock

iPazzPort SY-20-19VC, aka iPazzPort Pearl, is an Android 4.1.1 set-top box powered by Rockchip RK3066 that comes bundled with with a dual sided RF remote with a QWERTY keyboard, touch pad, and voice support. That’s pretty common these days. The design however, is somewhat original, as once you’re done watching videos or playing games, you can put back the remote into an opening in the set-top box to store it and recharge it, and it may prevent you from losing the remote under the pillows, and the remote will be fully charged most of the time. Here are the specifications of this media player: SoC – Rockchip RK3066 @ 1.6GHz + Mali-400 MP4 GPU System Memory – 1GB DDR3 Storage – 4GB + micro SD card slot (up to 32GB, or is it 16GB?) Connectivity 802.11b/g/n Wi-Fi 10/100M Ethernet 3G via external USB 3G dongle Video Output – HDMI 1.4 […]

June 14, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Rockchip RK3188 Based Giayee TVB103 Android TV STB Features VGA and HDMI Video Output

Although there are now many Rockchip RK3188 mini PCs, full sized quad core Android STB are not so common, especially with VGA output, and Giayee TVB103 is the only quad core media player providing both HDMI and VGA output that I know of. Here are Giayee TVB103 specifications: SoC – Rockchip RK3188 ARM Cortex A9 28nm Quad core 1.8GHz CPU + Quad-core GPU Mali400 System Memory – 1 to 2GB DDR3 RAM Storage – 8/16/32GB NAND Flash + micro SD card slot (up to 64GB) Connectivity: Built-in WiFi 802.11 a/b/g/n module supporting dual band (2.4GHz & 5GHz) 10/100 Base-T Ethernet Bluetooth 2.1 + EDR Video Output – HDMI, VGA, and AV (Note the latter can’t be seen on any pictures) Audio – L and R Output (RCA), S/PDIF, earphone jack & MIC input USB – 2x USB Host ports, and 1x Mini USB OTG port Dimensions – 155 x 90 […]