Operating Systems Category - Page 309 of 1034 - CNX Software

August 4, 2020August 4, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Comfile Launches 15-inch Industrial Raspberry Pi Touch Panel PC Powered by RPi CM3 Module

Three years ago, we noted Comfile has made 7-inch and 10.2-inch touch panel PC’s powered by Raspberry Pi 3 Compute Module. The company has recently introduced a new model with a very similar design except for a larger 15-inch touchscreen display with 1024×768 resolution. ComfilePi CPi-A150WR 15-inch industrial Raspberry Pi touch panel PC still features the CM3 module, and the same ports including Ethernet, USB ports, RS232, RS485, and I2C interfaces accessible via terminal blocks, and a 40-pin I/O header. ComfilePi CPi-A150WR specifications: SoM – Raspberry Pi Compute Module 3 Lite (CM3L) with Broadcom BCM2837 quad-core Arm Cortex-A53 processor @ 1.2 GHz with VideoCore IV GPU, and 1GB RAM Display – 15″ LCD with 1024 × 768 resolution, 16.7 million colors, pressure-sensitive touch screen (resistive type) Audio – Stereo Audio Output Connectivity – 10/100M Ethernet, optional WiFi via USB dongle USB – 3x USB 2.0 ports Serial – 1x RS232C […]

August 4, 2020February 20, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

MINIX Unveils USB-C Hub with 960GB SSD, 100W USB Charger

MINIX USB-C Hub with 480GB SSD, 100W USB Charger

MINIX, the Hong Kong company, is well-known for its Android media hubs and Windows 10 mini PC‘s but in recent years they’ve started designing accessories for Windows & Mac computers and laptops. In the past, we’ve checked out MINIX NEO C Plus USB-C Adapter, an M.2 SSD card pre-loaded Windows 10 Pro for N42C-4 Mini PC, and another USB-C hub with integrated 120 or 240GB SSD. The company has now unveiled four new accessories with three USB-C hubs, including one with a 480GB or 960GB SSD, and one compact 100W USB charger using the latest Gallium Nitride (GaN) technology. This morning, I received two pairs of USB-C hubs with different colors and two 100W USB chargers. The model I did not get – MINIX NEO Storage Pro – is specifically made for Apple MacBook Air and MacBook Pro with built-in SSD storage, HDMI 2.0 up to 4K @ 60 Hz, […]

August 3, 2020 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Linux 5.8 Release – Main Changes, Arm, MIPS, and RISC-V Architectures

Linus Torvalds has just released Linux 5.8: So I considered making an rc8 all the way to the last minute, but decided it’s not just worth waiting another week when there aren’t any big looming worries around. Because despite the merge window having been very large, there really hasn’t been anything scary going on in the release candidates. Yeah, we had some annoying noise with header file dependencies this week, but that’s not a new annoyance, and it’s also not the kind of subtle bug that keeps me up at night worrying about it. It did reinforce how nice it would be if we had some kind of tooling support to break nasty header file dependencies automatically, but if wishes were horses.. Maybe some day we’ll have some kind of SAT-solver for symbol dependencies that can handle all our different architectures and configurations, but right now it’s just a manual […]

August 2, 2020August 3, 2020 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Intel powered 2.4-inch Mini PC’s Show up as Alternatives to CHUWI LarkBox

Leaving HDMI PC sticks aside, we started to see really small, pocket-sized Intel mini-PCs last year with ECS LIVA Q2 micro PC with a dual-core N4100 Gemini Lake processor and measuring 70x70x33.4 mm. CHUWI managed to design an even smaller Gemini Lake Mini PC with Larkbox mini PC powered by a Celeron J4115 quad-core processor and measuring 61x61x43mm (2.4″ x 2.4″ x 1.7″). It looks like they may have launched a new 2.4-inch Mini PC form factor, as at least two other models with pretty much the same dimensions, but different specifications, have come to our attention. XCY X51 2.4-inch Mini PC Specifications: SoC – Intel Celeron N4100 quad-core Gemini Lake processor @ 1.1 / 2.4 GHz with Intel UHD Graphics 600; 6W TDP System Memory – 8GB LPDDR4 Storage – 128GB M.2 2242 SSD, MicroSD card slot Video Output – HDMI 2.0 up to 4K @ 60 Hz Audio […]

August 1, 2020 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

IoTSDR Linux Board Targets the Development of IoT Gateways with Standard or Custom IoT Protocols (Crowdfunding)

Xilinx Zynq-7010/-7020 powered iotSDR board by EmbedINN enables the development of IoT gateways with support for LoRa, SigFox, WeightLess, Bluetooth, BLE, 802.15.4, ZigBee, as well as custom IoT protocols. The board also supports GPS, Galileo, Beidou, and GLONASS navigation systems thanks to a Maxim Integrated MAX2769 GNSS chip. iotSDR key hardware features and specifications: SoC (one or the other) Xilinx Zynq-Z7010 (XC7Z010-1CLG400C) dual-core Arm Cortex-A9 processor with 256 kb on-chip memory, FPGA fabric with 28,000 logic cells, 17,600 LUTs, 2.1 Mb block RAM, 80 DSP slices Xilinx Zynq-Z7020 (XC7Z020-1CLG400C) dual-core ARM Cortex-A9 processor with 256 kb on-chip memory, FPGA fabric with 85,000 logic cells, 53,200 LUTs, 4.9 Mb block RAM, 220 DSP slices System Memory – 512 MB DDR3 Storage 128 Mbit QSPI flash memory for firmware Microchip AT24MAC602 SPI EEPROM for RF transceiver MCU firmware and data Radios “IoT” Radios RF Transceivers – 2x Microchip/Atmel AT86RF215 European band – […]

July 31, 2020August 3, 2020 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

T-bao MN22 Mini PC Features AMD Ryzen 3 2200U Mobile Processor

T-bao MN22 is an NUC-like mini PC powered by an AMD Ryzen 3 2200U mobile processor with a 12 to 25W TDP, coupled with up to 16GB RAM and 512GB NVMe SSD storage, as well as dual 4K video output thanks to HDMI 2.0 and DisplayPort video outputs. T-bao MN22 specifications: SoC – AMD Ryzen 3 2200U dual-core/quad-thread mobile processor @ 2.5GHx / 3.4 Ghz (Turbo Bosst) with Vega 3 Graphic; TDP: 12 to 25 Watts (Default: 15W) System Memory – 2x SO-DIMM DDR4 slots fitted with 8GB or 16GB RAM by default Storage – M.2 NVMe/SATA SSD socket with 128GB or 512GB NVMe SSD by default, SATA port for 2.5″ drive up to 7mm thick Video Output – DisplayPort, HDMI 2.0 Audio – 3.5mm audio output jack, 3.5mm mic-in jack Networking – Gigabit Ethernet, dual-band 802.11b/g/n/ac WiFi 5 and Bluetooth USB – 4x USB 3.0, 2x USB 2.0 Misc […]

July 31, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

BCM MX4305UE Industrial Mini-ITX Motherboard Features Intel Celeron 4305UE Processor

Intel Celeron 4305UE Industrial Mini-ITX Motherboard

Yesterday, as I wrote about AAEON UP Xtreme SBC, I realized that while I had seen some other Intel Celeron 4305UE Whiskey Lake boards with 3.5-inch and Pico-ITX form factors, I’ve just found out an industrial mini-ITX motherboard from BCM Advanced Research equipped with the processor. Just like other similar industrial Whiskey Lake SBC’s, Intel Core i3/i5/i7 Whiskey Lake-U Embedded processors are offered as options/upgrades for BCM MX4305UE motherboard, and the company says the board is designed for power-sensitive IoT devices and embedded applications such as video wall control management system, point-of-sales systems (POS), kiosks, automated vending machines, panel PCs, digital signage, medical and gaming devices. BCM MX4305UE mini-ITX board specifications: SoC Default – Intel Celeron 4305UE dual-core Whiskey Lake processor @ 2.0 GHz (base, no turbo frequency) with Intel UHD Graphics 610; 15W TDP Options Intel Core i7-8665UE quad-core processor up to 4.40 GHz max – TDP: 15W Intel […]

July 31, 2020August 24, 2021 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

CrowPi2 Raspberry Pi 4 Learning Kit Review – Part 1 – Unboxing and First Boot

Last month, we wrote about Elecrow introducing CrowPi2 Raspberry Pi 4 laptop and electronics learning kit for its launch on Kickstarter crowdfunding website. The company has now sent one of its kits to CNX Software for evaluation and review. I’ll start by checking out the content of the package, and boot it up, before publishing a more detailed review in a few weeks. The package is fairly big and highlights it’s made for kids over 8 years old with close to 100 course resources and over 20 electronics modules. The back of the package list the main features and package contents with for example a 11.6″ Full HD display, Raspberry Pi 4 4GB board running a customized (Linux) system or Retropie for game emulation, electronics components and modules like servos and motors, as well as some resources for gaming including two USB gamepads. The first things we get when opening […]