Android News - Page 160 of 363 - CNX Software

May 12, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Asus Zenfone Go TV Android Smartphone Includes a DVB-T2 & ISDB-T TV Tuner

Asus has introduced Zenfone Go TV Android 5.1 mid-range smartphone that only stands out thanks to its built-in digital TV tuner supporting DVB-T2 and ISDB-T standards letting you watch terrestrial digital TV on the go without needing Internet connection. Asus Zenfone Go TV (ZB551KL) specifications: SoC – Qualcomm Snapdragon 400 (MSM8928) quad core Cortex A7 processor @ 1.4GHz with Adreno 305 GPU System Memory – 2GB LPDDR3 Storage – 16GB/32GB eMMC Flash, MicroSD card slot up to 64 GB Display – 5.5″ TFT display with capacitive touch panel; 1280×720 resolution, Gorilla Glass 3; 450nits brightness Tuner – SONY SMT-EW100 Digital TV (DTV) tuner supporting DVB-T, DVB-T2, DVB-T2 Lite, ISDB-T, ISDB-Tmm Connectivity – 802.11 b/g/n WiFi; Bluetooth V4.0+EDR +A2DP; GPS, GLONASS, AGPS & BDS Cellular Connectivity Dual Micro SIM card with Sual SIM Dual Standby (DSDS) support Network Standard – WCDMA/TD-SCDMA/TDD-LTE/FDD-LTE Data Rate – LTE Cat4 – UL 50 / DL […]

May 11, 2016May 12, 2016 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

VideoStrong VS-M9RD Development Board is a Raspberry Pi Lookalike with Amlogic S905 SoC

VideoStrong is better known for their Android TV boxes with or without digital TV tuners, such as K1 Plus T2/S2 TV box, but the company has also designed several Amlogic based single board computers and development boards, including the latest Raspberry Pi inspired VS-M9RD board powered by Amlogic S905 quad core 64-bit ARM processor. VS-M9RD board technical specifications: SoC – Amlogic S905 quad core cortex-A53 processor @ 2.0 GHz with penta-core Mali-450 GPU up to 750 MHz System Memory – 1GB DDR3 SDRAM Storage – Optional 4 to 32 GB eMMC flash module, micro SD card slot Video Output – HDMI 2.0 up to 4K2K Connectivity – Gigabit Ethernet USB – 4x USB 2.0 host ports + mini USB OTG port Expansion Header 30-pin header 28-pin header 7-pin header with CVBS and JTAG signals Debugging – 4-pin 2.54mm pitch serial console header Misc – IR receiver, power and update buttons. […]

May 9, 2016June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

Orange Pi Lite Quad Core ARM Linux Development Board with WiFi is Now Available for $12

Shenzhen Xunlong Launched Orange Pi One Allwinner H3 board with Ethernet for $9.99 a couple of months ago, and the company has now started to sell Orange Pi Lite featuring a WiFi module, two full-size USB ports, an IR receiver, and an on-board microphone for $12 + shipping. Orange Pi Lite specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 512 MB DDR3 Storage – micro SD card slot up to 64GB Video & Audio Output – HDMI with CEC support Audio Input – Built-in microphone (not part of the listed specs, but clearly on the board) Connectivity – 802.11 b/g/n WiFi via Realtek WiFi module with u.FL connector USB – 2x USB 2.0 host ports, 1x micro USB OTG port Camera – CSI Interface Expansions – 40-pin Raspberry Pi compatible header Debugging – 3-pin […]

May 8, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Qualcomm DragonBoard 600c 96Boards Development Board Includes Ethernet and SATA

A few weeks ago, I was informed that some code about DB600c board powered by Qualcomm Snapdragon 600 processor (APQ8064T) was making it into mainline Linux, and more recently I found a website listing DragonBoard 600c with a low resolution picture of the board. While we don’t have the complete specifications yet, the form factor of the board is quite interesting, as we’ll find the typical 96Boards CE form factor on the right, and some extra interfaces on the left with Ethernet and SATA. It turns out, as we’ll see below, it’s perfectly compliant (hardware wise) with 96Boards CE “Extended Version” specifications. Preliminary specifications of DragonBoard 600c board: SoC- Qualcomm Snapdragon 600 (APQ8064 Fusion 3) quad-core Krait processor @ 1.7 GHz with Adreno 320 GPU @ 400MHz System Memory – 1GB or more RAM (TBD) Storage – eMMC Flash + micro SD slot + SATA port Video Output – HDMI […]

May 5, 2016May 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

NEXBOX 809VI Octa core Android TV Stick is Powered by Rockchip RK3368 Processor

While there are many Rockchip RK3368 TV boxes, I had not seen an RK3368 TV stick until today, with NEXBOX 809VI that combines the octa-core processor with 2GB RAM, and 8GB flash. NEXBOX 809VI specifications: SoC – Rockchip RK3368 Octa-core Cortex A53 processor @ 1.2GHz with PowerVR G6110 GPU System Memory – 2GB DDR3 Storage – 8GB flash Video Output – HDMI 2.0 up to 4K*2K 60Hz Connectivity – 802.11 b/g/n WiFi @ 2.4GHz, Bluetooth 4.0 USB – 2x USB 2.0 host ports, 1x micro USB port for power Power Supply – DC 5V/2A via micro USB port Dimensions – TBD The stick will run Android 5.1 just like all other RK3368 devices. The company claims the 809VI is available now, but they have a (short) history of promoting devices quite early in the development cycle, so it could be that only have a few engineering samples, and retail availability […]

May 4, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Olimex A20-OLinuXino-LIME2-eMMC Board Replaces NAND by eMMC Flash for Better Performance & Reliability

A20-OLinuXino-LIME boards are the most popular development board sold by Olimex, likely thanks to reasonable pricing, and Allwinner A20 is one of the rare low cost processor to features an actual SATA interface and Gigabit Ethernet support. The company has now launched a new version A20-OLinuXino-LIME2-eMMC, based on A20-OLinuXino-LIME2-4GB, but replacing the NAND flash by an eMMC flash that should offer both better performance and reliability. A20-OLinuXino-LIME2-eMMC specifications: SoC – Allwinner A20 dual-core ARM Cortex-A7 CPU @ 1.0 GHz with dual-core Mali 400 GPU System Memory – 1GB DDR3 Storage – 4GB eMMC flash (Micron), SATA data and power connectors, micro SD slot, 2KB EEPROM for MAC address and custom data Connectivity – Gigabit Ethernet Video Output – HDMI up to 1080p60 USB – 2x USB 2.0 host ports with power control and current limiter, 1x micro USB-OTG with power control and current limiter Expansion – 160 GPIOs on four […]

May 2, 2016May 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Wandboard Development Boards Get Android 6.0 Marshmallow Support

Wandboard development boards powered by Freescale i.MX6 Solo, Dual and Quad Cortex A9 processors were released over 3 years ago with Android 4.1 Jelly Bean. Contrary to many other boards that don’t get an updated version, Wandboard boards got support for Android 4.4 Kitkat, Android 5.x Lollipop, and now the community has recently released Android 6.0 Marshmallow. You can try the Android 6.0 SD card image as follows:

wget http://download.wandboard.org/wandboard-imx6/android-6.0/wandboard-all-android-6.0.1-sdcard-20160428.zip
unzip wandboard-all-android-6.0.1-sdcard-20160428.zip
sudo dd if=wandboard-android-6.0.1-ga-20160428-sdcard.img | pv | sudo dd of=/dev/sdX bs=16M

wget http://download.wandboard.org/wandboard-imx6/android-6.0/wandboard-all-android-6.0.1-sdcard-20160428.zip

unzip wandboard-all-android-6.0.1-sdcard-20160428.zip

sudo dd if=wandboard-android-6.0.1-ga-20160428-sdcard.img | pv | sudo dd of=/dev/sdX bs=16M

Where /dev/sdX is the device for your SD card. If you can remember the first Jellybean release had separate images for each version of the board, but thanks to device tree implementation, a single image is now released with all three versions. The full source code is also available in a 5.0 GB tarball. Since Freescale, now NXP, i.MX6 processors will be available until November 2022, we can most probably expect a few more Android releases for the board. Jean-Luc Aufranc […]

April 29, 2016April 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

NanoPC-T3 Octa-core Cortex A53 Single Board Computer Sells for $60

FriendlyARM launched NanoPC-T2 single board computer based on Samsung 5P4418 quad core Cortex A9 processor about 3 months ago, and the company has now an update based on Samsung S5P6818 Octa-Core A53 processor with the exact same interfaces and features including Gigabit Ethernet, WiFI, and Bluetooth, HDMI 1.4a, 30-pin expansion headers, etc… NanoPC-T3 specifications: SoC – Samsung S5P6818 octa core Cortex A53 processor @ up to 1.4GHz with Mali-400MP GPU System Memory – 1 or 2GB 32bit DDR3 RAM Storage – 8GB eMMC flash, and 1x SD card slot Connectivity – Gigabit Ethernet (RTL8211E), 802.11 b/g/n WiFi and Bluetooth LE 4.0 (Ampak AP6212) with on-board chip antenna and IPX antenna connector Video Output / Display I/F- 1x HDMI 1.4a, LVDS, MIPI DSI, parallel RGB LCD Audio I/O – HDMI, 3.5mm audio jack, on-board microphone Camera – 1x DVP interface, 1x MIPI CSI interface USB – 2x USB 2.0 type A host […]