sata News - Page 15 of 25 - CNX Software

April 28, 2017April 28, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Shuttle NS02E Rockchip RK3368 Android mini PC Supports PoE for Digital Signage and Thin Clients

The market is flooded of octa-core Android mini PCs or TV boxes for the consumer market, but Rockchip RK3368 powered Shuttle NS02E Android mini PC targets a different mark, specifically digital signage and thin clients as it’s been designed for 24/7 nonstop operation, and supports features such as PoE (Power over Ethernet). Shuttle XPC nano NS02E specifications: SoC – Rockchip RK3368 ARM Cortex A53 processor @ up to 1.5 GHz with Imagination PowerVR G6110 “Rogue” GPU System Memory – 2GB RAM Storage – 16GB eMMC flash, 2.5″ SATA bay for 7″ drives (requires one extra optional accessory), SD card reader Video Output – HDMI 2.0 Audio Output – Via HDMI, 3.5mm Line OUT audio jack Connectivity – Gigabit Ethernet (RTL8211-CG transceiver) with PoE support, 802.11 b/g/n WiFi and Bluetooth 4.0 (RTL8723BS module) USB – 3x USB 2.0 host ports Misc – Kensington lock hole, power button, power LED, HDD LED, […]

April 23, 2017April 24, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Zotac CI327 Nano Apollo Lake Fanless mini PC Features HDMI 2.0, DisplayPort 1.2, and VGA Video Outputs

While many Apollo Lake mini PCs have been launched, few support 4K @ 60 Hz video output, but Zotac CI327 Nano mini PC does even better than that thanks to HDMI 2.0 and DisplayPort 1.2 outputs allowing for dual 4K UHD @ 60 Hz setups, and it also adds an extra VGA port to enable triple display setups. The rest of the specifications are not too bad either with three models CI327 Nano (windows / no windows) and CI327 Nano Plus with slightly different hardware specifications: SoC – Intel Celeron N3450 quad-core processor @ 1.1GHz / 2.2GHz with Intel HD Graphics 500 System Memory Nano with Windows and Nano PLUS – 4GB DDR3L (one slot occupied, up to 8GB) Nano – 2x 204-pin DDR3L-1866 SO-DIMM slots (up to 8GB) Storage – 1x 2.5″ SATA 6.0 Gbps SSD/HDD slot; 3-in-1 (SD/SDHC/SDXC); Nano with WINDOWS only: 32GB M.2 on-board SATA SSD Video […]

April 11, 2017April 11, 2017 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Zidoo X10 Android & OpenWrt TV Box with 3.5″ SATA Bay Sells for $229

Zidoo has sold two TV boxes based on Realtek RTD1295 so far with Zidoo X9S and Zidoo X8, and the company has done a pretty good job based on my review of Zidoo X9S. Both models run Android 6.0 with HDMI input recording and broadcasting functions, as well as OpenWrt for NAS functions, with X8 model relying on USB 3.0 storage, and X9S adding an external SATA port. It would be nice to have a model with an internal SATA bay, and it’s exactly what Zidoo X10 brings to the table. Zidoo X10 specifications with highlights in bold showing differences with Zidoo X9S: SoC – Realtek RTD1295 quad core Cortex A53 processor with ARM Mali-T820 MP3 GPU System Memory – 2GB DDR3 Storage – 16GB eMMC flash + micro SD slot up to 32GB + SATA 3.0 bay for 3.5″ hard drives Video I/O – HDMI 2.0a output up to […]

April 3, 2017May 11, 2017 by Jean-Luc Aufranc (CNXSoft) - 34 Comments

FriendlyELEC Introduces $12.99 1-bay NAS Dock Kit for NanoPi NEO & NEO 2 Boards

NanoPi NEO is a tiny board with Fast Ethernet and USB 2.0 interface, so in theory it could make a nice low-end NAS as long as you don’t need the best performance. As always the problem is that there was no case for it, but FriendlyELEC changes that as they just launched a 1-bay NAS Dock Kit for NanoPi NEO / NEO 2 board selling for just $12.99 (promotional price at launch). The kit comes with the following: 1-bay NAS Dock expansion board with JMicron JM20329 USB to SATA bridge SATA connector for 2.5″ HDD drive Extra USB host port On/off switch, and dual color status LED Header to connect NanoPi NEO board 12V DC power input Dimensions – 151 x 89.7 mm NS-120 aluminum enclosure (154 x 100 x 47.5 mm, 4141 grams) Heatsink set for NanoPI NEO M3 6mm screws, M2.5 6 mm screws Four rubber pads Front […]

March 30, 2017 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

$100 Qotom Q1900G4-M Nano-ITX Board Powered by Intel Celeron J1900 SoC is Equipped with Four Gigabit Ethernet Ports

Qotom Q1900G4-M is a motherboard designed for networking applications thanks to four Gigabit Ethernet ports connected to an Intel Celeron J1900 quad core “Bay Trail” processor. The board supports up to 8GB DDR3 RAM via a SO-DIMM slot, storage through a SATA port and an mSATA connector, and WiFi or cellular connectivity through a mini PCIe slot and SIM card slot. Qotom Q1900G4-M board specifications: SoC – Intel Celeron J1900 quad core “Bay Trail” processor @ 2.0 GHz / 2.41 GHz (Burst) with Intel HD graphics (10W TDP) System Memory – 1x SO-DIMM sockets for up to 8GB DDR3 memory Storage – 1x SATA 3.0 port + power (14 & 15), 1x mini PCIe connector for mSATA SSD (16) Video Output – VGA (5) Connectivity 4x Gigabit Ethernet ports (3) with Wake-on-LAN support SIM card socket (17) USB only mini PCIe connector for WiFi, 3G or 4G (18) USB – 3x […]

March 30, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

MeLE V9 4K Android TV Box Comes with a 3.5″ SATA Slot, a Cooling Fan

We’ve seen several devices based on Realtek RTD1295 processor. They all come with a SATA interface, either via an external connector like Zidoo X9S, a 2.5″ SATA bay like Beelink SEA I, or a 3.5″ SATA bay as found in Eweat R9 Plus. However, all those devices are fanless, and at least one person expressed concerns when using a device with an internal hard drive without active cooling. MeLE V9 fills that gap, as the RTD1295 TV box features a 3.5″ SATA slot and an active fan for cooling both the device and the hard drive. MeLE V9 specifications: SoC – Realtek RTD1295 quad core Cortex A53 processor with ARM Mali-T820 MP3 GPU System Memory – 2GB DDR3 Storage – 16GB eMMC flash + 3.5″ SATA slot + SD/SDXC card slot Video I/O – HDMI 2.0a output up to 4K @ 60 Hz with 10-bit HDR support, AV port, and […]

March 24, 2017March 24, 2017 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

CubieBoard6 Development Board Powered by Actions Semi S500 Processor Comes with SATA, LiPo Battery Support

CubieTech launched Cubieboard with Allwinner A10 processor in 2012, and while they may not be as popular as some other boards like Raspberry Pi, ODROID, or Orange Pi boards in 2017, the company is still around after around 5 years, and their latest board is Cubieboard6 powered by Action Semi S500 quad core Cortex A9 processor with 2GB RAM, 8GB flash, HDMI, wired & wireless connectivity, SATA, battery support and more. Cubieboard6 specifications: SoC – Actions Semi S500 quad core ARM Cortex-A9 processor with Imagination PowerVR SGX544 GPU System Memory – 2GB LPDDR3 Storage 8GB eMMC flash SATA 3.0 port for 2.5″ HDD/SSD up to 4TB micro SD card slot up to 32GB Video Output – HDMI 1.4b up to 1080p60 Audio I/O – Via HDMI output, 3.5mm audio output (HP) jack, 3.5mm audio input (MIC) jack Connectivity – 10/100M Ethernet, 802.11 b/g/n WiFi, Bluetooth 4.0 LE (AP6212) with u.FL […]

March 23, 2017March 23, 2017 by Jean-Luc Aufranc (CNXSoft) - 46 Comments

GnuBee Personal Cloud 1 Low Cost Linux NAS Supports Up to Six 2.5″ SATA Drives (Crowdfunding)

Networked Access Storage (NAS) with a large number of SATA bays usually cost several hundreds dollars up to thousands of dollars depending on the features set and performance, but there’s a new a project called GnuBee Personal Cloud 1, or GB-PC1, that delivers a MIPS Linux system supporting up to six 2.5″ SATA drives for less than $200. GB-PC1 NAS specifications: Processor – MediaTek MT7621A dual core, quad thread processor @ 880 MHz, overclockable to 1.2 GHz System Memory – 512 MB DDR3 Storage – micro SD card slot tested up to 64 GB, 6x 2.5” SATA HDD or SSD Connectivity – Dual Gigabit Ethernet USB – 1x USB 3.0 port, 2x USB 2.0 ports Serial port – 3-pin J1 connector or 3.5 mm audio-type jack Power – 12 VDC @ 3 A via 5.5 mm x 2.1 mm, center-positive barrel jack Dimensions – 21.6 cm (L) x 7 cm […]