Android News - Page 181 of 364 - CNX Software

December 4, 2015March 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 289 Comments

Review of Beelink MINI MX TV Box with MX Player

Beelink MINI MX Amlogic S905 Android media player has similar features, and costs about the same as K1 Plus TV box I reviewed last week, so it would be interesting to compare both. While specifications are similar there are some differences. For example, MINI MX lacks AV output, and only features two USB ports against four for K1 Plus, but it supports Gigabit Ethernet which could be an advantage while playing high bitrate 4K videos, as well a Bluetooth 4.0. I’ve already provided pictures and torn down MINI MX, so today is time for the full review and a comparison with K1 plus. First Boot, Settings and First Impressions I connected my USB 3.0 hard drive to one of the USB port, and a USB hub to tghe other port with a USB webcam, a USB keyboard, and two RF dongles for a gamepad and an air mouse. I also […]

December 3, 2015December 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Sonoff & Slampher are $5 RF and WiFi Smart Switches and Lightbulb Adapters (Crowdfunding)

ITEAD Studio has launched two new low cost home automation products with Sonoff smart switch, and Slampher smart E27 light bulb adapter both supporting control via WiFi and your Android smartphone, or 433MHz with a simple remote control, while still retaining the capability to control your electrical appliances and lights with a manual switch. Installation is pretty easy, and safer than some other products like Semlamp. Sonoff – You simply need to cut the cable to your appliance, and insert two wires into the IN part, and the other two wires into the OUT part. Turn if on, and add it to the app if you are going to use a smartphone Slampher – Remove your light bulb from its current socket, screws the bulb to Slampher, and put it back into your socket. Register the light in to the app and your done. Both devices will send data to […]

December 2, 2015May 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Xiaomi Mi 3 TV Box Board’s Pictures Reveal Amlogic S905-H Processor

Xiaomi unveiled Mi 3 TV box based on Amlogic S905 processor a while ago, but since we’ve got so many Amlogic S905 boxes on the market, and the interface is only in Chinese, I did not find it that interesting. But somebody did a teardown of the device, and sent me some good pictures revealing that the device uses Amlogic S905-H with DTS and Dolby licenses paid for and enabled. So that means just like for Amlogic S812, where there’s a S812-H with Dolby and DTS, there are two versions for Amlogic S905. I understand the silicon might be the same, but the SDK will differ (TBC). Other main components include a 4GB Toshiba THGBMBG5D1KBAIT eMMC 5.0 flash, two NANYA NT5CB256M16DP-EK 512MB DDR3 chips (1GB in total), a Broadcom wireless chipset (BCM4345) for 802.11ac Wifi and Bluetooth 4.1, and Ricoh RN5T567A PMIC. There are few connectors as on other Xiaomi […]

December 2, 2015December 2, 2015 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Omate Rise is a $199 3G and WiFi Smartwatch Powered by Mediatek MT2601 SoC (Crowdfunding)

Most smartwatches sold on the western markets are designed to be smartphone’s companions, and only come with Bluetooth LE connectivity, while we’ve seen many smartwatches (aka watchphones) with SIM card slot originating from China in the past, including the lower end No.1 D3 smartwatch which I reviewed recently. But this may be changing, as Omate is going to launch a new smartwatch called Omate Rise that will include 3G connectivity via a micro SIM card slot, as well as WiFi, Bluetooth Smart, and GPS. Omate Rise specifications: SoC – Mediatek MT2601 dual core ARM Cortex A7 @ 1.2GHz with ARM Mali-400 MP GPU System Memory – 512MB RAM Storage – 4GB flash Display – 1.3″ round muti-touch color display with 360×360 resolution (Innolux) Connectivity – Bluetooth 4.1 LE (A2DP profile), WiFi 802.11 b/g/n, GPS Cellular Connectivity – 3.5G HSDPA (2100/1900 MHz), GPRS / EDGE /GSM (850/900/1800/1900 MHz); micro SIM card […]

December 1, 2015December 1, 2015 by Jean-Luc Aufranc (CNXSoft) - 50 Comments

Tronsmart Vega S95 4K Android TV Box Features an External SATA Port

Tronsmart is adding three new devices to the long list of Amlogic S905 TV boxes on the market with: Vega S95 Pro – 1GB RAM, 8GB flash, AP6212 wireless module (2.4GHz WiFi + Bluetooth 4.0) Vega S95 Meta – 2GB RAM, 8GB flash, AP6330 wireless module (Dual band WiFi + Bluetooth 4.0) Vega S95 Telos – 2GB RAM, 16GB flash, AP6335 wireless module (802.11 b/g/n/ac WiFi + Bluetooth 4.0), and SATA All three models also include Gigabit Ethernet. The Pro and Meta models have a lot of competition, but Telos is quite unique so far, as it’s the first to include a SATA port. Tronsmart Vega S95 Telos specifications: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 2GB DDR3 Storage – 16GB eMMC 5.0 flash by Samsung + SATA connector + SD card slot Video HDMI […]

December 1, 2015December 1, 2015 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

ShiftWear Shoes Integrate a Flexible e-Paper Display, Energy Harvesting Capabilities (Crowdfunding)

ARM CTO, Mike Muller, showcase imprinted electronics, that is an integrated circuit printed on a plastic film, at ARM TechCon 2015, and several products are featured flexible displays, so in future flexible electronics could bring innovation applications from truly wearables electronics to traceable bank notes, and so on. A company has launched an Indiegogo campaign for a new product, that’s both cool and relatively useless, with ShiftWear sneakers that integrate a flexbile e-Paper display, a battery that recharges by harvesting energy from your steps, and some connectivity (likely Bluetooth LE) to update the display from your iOS, Android or Windows device. Three models are available: L1, M1 and H1 referring to low height, medium height and high height of the part around the ankle (heel tab?). But all three have basically the same features: Always-on HD color e-paper flexible display Up to 30 days of battery life Waterproof up to […]

November 30, 2015January 25, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Bmorn W4301 is a $34 Android Smartphone Powered by Intel Atom x3-C3101 Processor

Intel unveils their plans for Atom X3, X5 and X7 processors last year, but so far we’ve mostly seen devices with Atom X5 processors. The lowest end Intel Atom processor, namely X3-C2101 “Sofia” dual core processor, with an ARM Mali-400MP GPU and 3G connectivity did find its way into Teclast X70 3G tablet that is now selling for $64 and up retail (but there’s a deal on Geekbuying for $45.99), and a company called Bmorn is about to launch their W4301 smartphone based on Intel/Rockchip X3-C2101 SoC for just $34 ( factory price in quantities), but I think the retail price should be around $60 including shipping. Bmorn W4301 preliminary specifications: SoC – Intel Atom x3-C3130 dual x86 core processor @ up to 1GHz with Mali-400MP2 GPU @ 533 MHz System Memory – 512MB or 1GB LPDDR2 Storage – 4 or 8 GB eMMC Display – 4″ touchscreen with 800×600 resolution […]

November 28, 2015November 28, 2015 by Jean-Luc Aufranc (CNXSoft) - 68 Comments

K1 Plus Amlogic S905 TV Box Review

Videostrong KI Plus is one of the first Amlogic S905 TV boxes to be launched on the market, and it also happens to be one of cheapest model selling for around $45 on various sites, and it’s even available for $39.99 on GearBest for Black Friday / Cyber Monday. I’ve posted the specifications and pictures of the device previously, and after updating the firmware, I’ve finally completed the review. First Boot, Settings and First Impressions As usual, I’ve connected a whole bunch of cables and peripherals to the device to make the power supply can handle it, including a USB hard drive, a USB webcam, a USB keyboard, a USB hub with two RF dongles for Tronsmart Mars G01 gamepad and MeLE F10 Deluxe air mouse, as well as a HDMI, optical audio and Ethernet cables, and a speaker connected to the 3.5mm AV jack and powered by one of […]