Remote.It adds Bluetooth assisted WiFi configuration to Raspberry Pi SBC’s

Remote.It, a company providing remote access services, has released an open-source project to enable Raspberry Pi WiFi network configuration using Bluetooth (BLE), so users can easily configure WiFi on the board by simply using their smartphone.

Configuring WiFi on a Raspberry Pi usually involves either:

  • Manual configuration – The user connects a monitor and keyboard to the Raspberry Pi to configure the wireless network directly on the device.
  • Pre-configured SD cards, NVMe SSDs, or USB drives –  The WiFi ESSID and password can be set in Raspberry Pi USB imager, and the Raspberry Pi will automatically connect to the network at boot time. That’s quick, but less flexible since the credentials can’t be modified after deployment, and it only works when using a single wireless network.

Remote.It offers a third option for WiFi provisioning using Bluetooth LE. The Raspberry Pi can run headless or fully enclosed into a product, and the users can easily configure WiFi by using BLE connectivity on a phone or other host.

The first step will be to download and install Raspberry Pi images pre-configured with Remote.It remote access solution. The company provides four images based on Raspberry Pi OS Desktop/Lite 32-bit and 64-bit images.

Remote.It Raspberry Pi Desktop Lite images

You’ll then need to install the Remote.It mobile app, or desktop application, or simply visit https://app.remote.it on a BLE-enabled host to create a free Remote.It account and access to the dashboard. Note this won’t work from Firefox, but only with Google Chrome or other web browsers with Bluetooth support.

Remote.it Dashboard Setup WiFi with Bluetooth on Raspberry Pi

You can click on the “+” icon  (Add Device) to access the dashboard above, and then select “Setup WiFi”. Scan for Raspberry Pi devices, select the network, and enter the password, and you should be good to do. The code specific to Bluetooth WiFi Onboarding is open-source and available on GitHub. It’s been designed for Raspberry Pi, but should also work with other devices running Debian.

Most people will not need Bluetooth WiFi onboarding, but there are situations where it can be useful, especially for people or companies deploying multiple devices with a Raspberry Pi SBC or Compute Module embedded into the devices with no user-accessible video output and/or USB port.

Since Remote.It offers remote access services similar to Raspberry Pi Connect, CNX Software asked about the difference between the two services (besides BLE WiFi onboarding):

Raspberry Pi Connect and Remote have the same high-level goal of giving you access to your devices remotely. Connect offers command-line or GUI (remote desktop) access to your Pi. Connect might be enough for a student or DIY enthusiast with only Pis.

Remote.It has granular control over specific service protocols (RDP, VNC, SSH, FTP, Etc.) for zero trust access. Remote.It also supports any device (see icon list below). Remote.It supports IoT, IT, OT, and unlimited use cases where you need to connect to a wide range of devices including very small IoT and Smart devices (sensors, NAS, cameras, etc.)”

Remote.it supported OS servicesRemote.It works with NVIDIA Jetson board, OpenWrt routers, and a wider range of OS and services. The service is free for personal use for up to 5 devices, although this plan has some limitations (e.g., 7 days of logs only). Professional (8 devices), Business (15 devices), and Fleet (255 devices) licenses are also available, each with a different number of supported devices and features. You can find more details on the pricing page.

Share this:
FacebookTwitterHacker NewsSlashdotRedditLinkedInPinterestFlipboardMeWeLineEmailShare

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK 5 ITX Rockchip RK3588 mini-ITX motherboard

5 Replies to “Remote.It adds Bluetooth assisted WiFi configuration to Raspberry Pi SBC’s”

  1. Sounds cool, although they stuck it under an MIT license rather than GPL, but since you have to download the preconfigured images as well as smartphone app anyway, isn’t it at most the same amount of work to use RPi Foundation’s Imager to configure the Wi-Fi before flashing the microSD card?

    1. I think it’s mostly interesting for companies making products based on Raspberry Pi and users can configure WiFi via BLE by themselves, even if the product does not have a display.

      1. I suppose.

        I actually just learned this from Da:
        “Raspberry Pi image flasher now use a proprietary firstrun.sh script to configure wireless. It is no longer genetically applicable since Raspberry Pi love doing everything against any standard to lock-in customers. You need to follow the old configuration method.”

Leave a Reply

Your email address will not be published. Required fields are marked *

Boardcon Rockchip RK3588S SBC with 8K, WiFI 6, 4G LTE, NVME SSD, HDMI 2.1...
Boardcon Rockchip RK3588S SBC with 8K, WiFI 6, 4G LTE, NVME SSD, HDMI 2.1...