2017 is coming to an end, and as I do every year, I’ll take a look back at the year that was on CNX Software. The pace of development boards launches has not slowed down this year, and we get an even wider range from the low-end with Orange Pi or NanoPi boards, to much more powerful ARM boards, and some new entrants like Libre Computer. The same is true for TV boxes, most of which now support 4K HDR, ranging from ultra cheap models selling for less than $20 to higher end Android TV boxes, while mini PCs were dominated by Intel Apollo Lake models, although some Cherry Trail products were also launched.
Processor-wise, Amlogic launched more Amlogic S905X derivatives with S905W/S905D/S905Z, which are popular in the TV box market. Rockchip’s most interesting processor this year was RK3328 quad core Cortex A53 processor designed for 4K HDR Android TV boxes, but also popular with single board computers thanks to Gigabit Ethernet and USB 3.0 interfaces that provide good I/O performance. Allwinner H2+/H3/H5 were launched last year, but they kept being used in cheap development boards, retro game consoles, etc.. The company also launched A63 SoC for 2K tablets, and H6 for 4K OTT TV boxes, and we can expect the latter not only to be found in TV boxes such as Zidoo H6 Pro, but in more Orange Pi H6 boards, and likely other products in 2018 since beside media capabilities, the processor also supports Gigabit Ethernet, USB 3.0, and PCIe. Intel’s Celeron and Pentium Apollo Lake processors dominated the entry-level Windows mini PCs market this year, and Linux was much better supported than in Bay Trail / Cherry Trail processors, but few manufacturers decided to offer Apollo Lake mini PC pre-installed with Ubuntu or other Linux distributions.
2017 was also an interesting year for the Internet of Things (IoT) with Espressif ESP32 going into full gear, and prices dropping to $5 for maker boards. Other WiFi IoT solutions that looked promising last year such as RTL8710AF, did not really took off in a big way. LPWAN (Low Power Wide Area Network) solutions got even more traction with LoRa dominating, but far from being alone with Sigfox, and the emergence of 3GPP standards like NB-IoT and eMTC.
While I had written articles about 3D printing in the past, it really became a proper category on the blog this year, thanks to Karl’s reviews, and 3D printers provided by GearBest. I’d also like to thank Ian Morrison (Linuxium), TLS, Blu, Nanik who helped with reviews and/or articles this year.
I’ve again compiled a list of the most popular posts of 2017 using the pageviews from Google Analytics, but for a change, I’ll show the results in reverse order:
- Google Assistant SDK Turns Your Raspberry Pi 3 into Google Home (May 2017) – Voice assistants like Amazon Alexa or Google Assistant went beyond the companies’own products, and Google Assistant SDK release allowed developers to make their own DIY smart speaker based on Raspberry Pi 3 board, or other ARM Linux boards. I could successfully implement my own using an Orange Pi Zero kit.
- Mecool BB2 Pro Review – TV Box with DDR4 Memory – Part 2: Android Firmware, Benchmarks, Kodi (January 2017) – Mecool BB2 Pro was one of the first Amlogic S912 octa-core TV boxes with DDR4 memory, but my tests did not show any benefits over DDR3 memory.
- Mecool KI PRO Hybrid Android TV Box with Amlogic S905D SoC, DVB-T2 & DVB-S2 Tuners Sells for $80 (May 2017) – For some reasons, post about VideoStrong/Mecool Android set-top boxes are quite popular on CNX Software, and KI PRO was the first model based on Amlogic S905D processor with support for multiple demodulators.
- Orange Pi 2G-IoT ARM Linux Development Board with 2G/GSM Support is Up for Sale for $9.90 (March 2017) – “Cellular IoT Linux board for $10? Where’s the buy button?” might have been the first reaction to many people. But when buyers received their board, it was a struggle and may still be, since it was based on a RDA Micro processor for phones poorly supported in Linux.
- Installing Ubuntu 17.04 on CHUWI LapBook 14.1 Apollo Lake Laptop (February 2017) – People want their cheap and usable Ubuntu laptop, and if manufacturers won’t make one for them, they’ll find ways to make their own. Sadly, CHUWI massively changed the hardware, and it’s not such a good solution anymore.
- ASUS Tinker Board is a Raspberry Pi 3 Alternative based on Rockchip RK3288 Processor (January 2017) – A large company like ASUS entering the maker board market, and the solution inspired from Raspberry Pi 3, but more much powerful. That got people interested!
- Creality CR-10 3D Printer Review – Part 2: Tips & Tricks, Octoprint, and Craftware (May 2017) – It was the year of cheap $100 to $200 3D printer, but CNX Software visitors were more interested in a better model, and Creality CR-10 review was the most popular 3D Printer review/post this year.
- Mecool KIII Pro Hybrid STB Review – Part 2: Android Firmware, TV Center, and DVB-T2 & DVB-S2 App (March 2017) – VideoStrong sells some inexpensive Android TV boxes with tuner under their Mecool, and KIII Pro was their first octa-core model with both DVB-T/T2 and DVB-S2 tuners.
- ASUS Tinker Board’s Debian & Kodi Linux Images, Schematics and Documentation (January 2017) – ASUS board was somehow started selling before the company intended to, and while firmware & documentation were there, they were hard to find, so people looked for that information, and found it on CNX Software.
- MINIX NEO U9-H Media Hub Review – Part 2: Android 6.0 Firmware & Kodi 17 (March 2017) – Apparently, I’m not the only to consider MINIX NEO U9-H to be one of the best Android TV boxes, as my review of the media hub was the most read post of 2017.
981 posts were published in 2017. Let’s go straight to users’ country and city location data.
The top five countries have not changes, but this year Germany overtook the United Kingdom in second position. Traffic from India increased on a relative basis, and Australia made it to the top ten at the cost of Russia. London and Paris kept the two top steps, but Bangkok rose to third position, while last year third, Tel aviv-Yafo went away completely from the list. New York is gone being replaced by Warsaw in 8th position.
The list of the most used operating systems, and browsers is fairly stable, but the trends noticed in past years continues, with Windows share of traffic going down, Android going up, and Linux stable, while Chrome dominated even more, with most other browsers going down in percentage basis, except Edge that is very slowly replacing Internet Explorer, and Samsung Internet that replaced Opera mini in the list.
Desktop traffic still rules, but mobile + tablet traffic now accounts for around a third of the traffic.
Finally, I went to dig into pagespeed data with pages loading in 15.58 seconds on average. I then filtered the countries with more than 5,000 pageviews, and CNX Software pages and posts loaded fastest in Portugal, Denmark, and Macedonia. However, people in Venezuela need to wait close to 2 minutes for a page to load on average, and in China and Iran around one minute.
Next year looks promising, and I expect to test Gemini Lake mini PC, and maybe some ARM based mini PCs or laptops, but I’ll review less TV boxes as due to some new regulations I can’t easily import them. The regulatory framework is now in place for LPWAN standards, and I should be able to start playing with LoRa and NB-IoT in 2018, using local services, or my own gateway(s). I’ll keep playing with development boards, as I’m expecting interesting Allwinner H6, Realtek RTD129x, Hilsicon, and other platforms in the year ahead, as well as various IoT products.
I’d like to come together with some of the devices and boards reviewed in 2017 (and a Linux tux) to wish you all a prosperous, healthy, and happy new year 2018!
Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.